What causes a ezgo golf cart to backfire?
In almost all cases, whether it is a 2 cycle or 4 cycle engine, golf cart backfiring is caused by the accelerator cable being out of adjustment at the throttle plate of the carburetor. With the ignition key in the OFF position and the seat completely removed, press the accelerator pedal down.
How do you adjust the carburetor on a ezgo txt?
2 Cycle engine: The adjustment screw is on the side of the carburetor and is parallel to the ground. You can identify it by the lock nut at the base of the screw. Loosen this and turn the screw all the way into a soft seat, then back it out one and a half (1-1/2) turns.
How do I stop my golf cart from backfiring?
How do I stop my golf cart from backfiring? One simple way to stop the golf cart from backfiring is to use good quality fuel. Once this is done, ensure that the throttle plate is closed by adjusting the accelerator cable at the plate.
Why does the front end of my EZGO RXV shake?
The front end of an EZGO RXV may shake or vibrate due to one or more reasons. You may have an improper toe-in adjustment or there may not be sufficient pressure in the tires. You can do the following if the front end shakes when an EZGO PCS cart moves at a relatively high speed.
What to do with a 2009 EZGO RXV golf cart?
For a 2009 EZGO RXV golf cart with no front suspension, you may consider using adjustable springs and collars in place of the existing front springs. This can be particularly helpful if you take the cart over bumps and humps rather than the smooth surfaces intended.
Where is the camber on a 2008 EZGO RXV?
With a standard 2008 EZGO RXV golf cart, you may consider enlarging the hole above the strut at the point where it’s mounted on the dash frame using a 10mm bolt. The enlargement will help in the movement of the strut top for a camber adjustment.
What are the features of the EZGO freedom golf cart?
One of the innovative features of the EZGO Freedom RXV Golf Cart was the inclusion of a motor brake built into the motor making it so when you come to a stop, you do not have to engage the motor brake manually – It locks automatically.