What can cause grinding on startup?

What can cause grinding on startup?

So, what is that grinding noise you hear when starting a car? Most likely, if it is true grinding that you hear, the problem is related to the starter. Causes include the starter not lining up correctly with the ring gear on the flywheel, missing or damaged gear teeth, or a faulty solenoid.

Why does my Honda Civic make a loud scraping noise?

This article applies to the Honda Civic/Del Sol (1992-2000) and Accord (1990-2002). A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area.

Why does my car make a squealing noise when reversing?

The squealing noise can occur when metal touches metal. Check the car rotor and pads and if there is any small metal part between the two, it will create a squealing noise. Make sure that you clean the rotor as well as pads to prevent any metal part from getting in between both. 4. Examine The Grease Shims

Why do I hear a screeching noise in my car?

A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area. The dust shield can bend for any number of reasons, from something as simple as running over a curb to getting into a minor accident.

What can I do about the scraping sound on my Honda Accord?

Replace and attach brake disk with two screws. Use 17mm socket and ratchet to tighten bolts holding the brake caliper in place. Use 12mm socket and ratchet to connect the brake line bracket. Remove brake dust by spraying rotors, pads, and calipers with cleaner.

This article applies to the Honda Civic/Del Sol (1992-2000) and Accord (1990-2002). A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area.

Replace and attach brake disk with two screws. Use 17mm socket and ratchet to tighten bolts holding the brake caliper in place. Use 12mm socket and ratchet to connect the brake line bracket. Remove brake dust by spraying rotors, pads, and calipers with cleaner.

A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area. The dust shield can bend for any number of reasons, from something as simple as running over a curb to getting into a minor accident.

Where are the ball joints on a Honda Civic?

Check the front suspension’s upper and lower ball joints. If they are bad and out of grease, then they will start to make noise as metal rubs against metal. The upper ball joint is located on the upper control arm. The lower ball joint is located at the end of the lower control arm (right below the axle/front brake rotor).

Posted In Q&A