What are the standard sizes for bathtubs?
Common or standard dimensions for a freestanding bathtub are:
- 60 inches long (5ft), 30 inches wide (2.5ft) with 19 inches of water depth (1.89ft).
- Small freestanding bathtubs can run 55 inches long(4.58ft), 27 inches wide (2.25ft) with a water depth of 15(1.25ft).
What is the minimum size of a bathtub?
Knowing standard bathtub sizes is the first step toward smart, effective bathroom planning. As you plan the location for your tub, remember that designers recommend the free space in front of the tub should be a minimum of 60 inches long and 30 inches wide, to allow users to safely enter and exit the tub.
Do bathtubs come in different widths?
As with clawfoot variety, there are many bathtub sizes to choose from, but the most popular is 60 inches long, 41 inches wide, and 24 inches deep. If that’s too much tub for your space, you’ll also find oval freestanding tubs as small as 55 inches by 27 inches by 15 inches.
How many gallons is a free standing tub?
Freestanding, Corner and Other Bathtubs Since they are designed for single person bathing, most freestanding bathtubs can hold anywhere from 90-100 gallons of water. (340-378 liters).
How is bathtub depth measured?
Here’s how to measure for a bath Then, on the exterior of the bath, measure from the floor to the top edge, giving you the height. Finally, measure the depth, which is the interior measurement, from the deepest part of your bath to the overflow. This to gauge the depth of water it can hold.
How deep is a deep bathtub?
A standard bath tub is 14 to 17 inches in depth. A European style is 18 inches deep and a Japanese (or Greek) style is 22 or more inches in depth. There are numerous makes and models of bath tub styles including built-in, freestanding, soaking, and whirlpool. These tub styles have only frontal exposure.
How do I know what kind of tub I have?
What Bathtub Material is in my Bathroom
- Step 1 – Press on the Side of the Bathtub. If you press on the side of your bathtub and it has a little give, chances are it is made of acrylic of fiberglass.
- Step 2 – Inspect Surface Damage.
- Step 3 – Hold a Magnet to the Tub.
- Step 4 – Look for Extra Supports.
How do you measure for a new bathtub?
Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top. If you don’t get a round figure, take a number that is close to the standard size, that is listed below.