What are the problems with the Mazda RX8?
The problem is that as the rotors wear down, the fuel and air mixture may start to leak from one combustion chamber into another, which reduces the engine’s efficiency. This leads to low compression and manifests itself as poor starting when warm.
Can you buy a second hand Mazda RX8?
If you’re still thinking of buying a second hand Mazda RX8, then make sure you read through the following posts: Do NOT buy a used RX8. The engine does not last unless it is taken care of by someone who knows exactly what they are doing. The average engine life is 60000mi. If your (sic) going for a new one, just lease it and beat it up.
What’s the difference between Mazda RX8 and MX5?
Being a Rotary Engine Car Mazda Rx8 cars are a little different from normal piston based cars. But Soon Mazda is going to launch MX5 Rotary powered cars. Which means that Mazda Is still hopeful to win the market with their Rotary technology.
What to do if your Mazda RX-8 won’t start?
If the lights anywhere in your car are not turning on, your battery may be dead. Check to see if you can start your engine. If the engine turns on then your battery should be working properly. However, if the engine will not start, refer to the Car Cranks But Won’t Start .
What causes wheel replacement signal on Mazda RX-8?
It also could be a sensor malfunction, a wire loose, or some other minute detail that is upsetting the complex computer of the Mazda RX-8. If you have installed aftermarket wheels with different sizes front to rear, that may cause a false sensor signal to the ECU, please look at Wheel Replacement guide.
Why is my Mazda RX-8 stalling and stalling?
You feel it in the brake pedal,steering wheel,doors, and you can see the vibration in the mirror’s.Dealer said that their scanner/computer show that everything is in the NORMAL RANGE LIMITS……. The motor mounts have been checked and show no signs of wear.
When did the Mazda RX-8 come out?
This category covers 2004, 2005, 2006, 2007, 2008 Mazda RX-8 Troubleshooting models. Your guide to finding the problems with your Mazda RX-8 so you can effectively and efficiently resolve them.
How does the Mazda RX8 Renesis engine work?
(See NO.8 ENGINE RUNS ROUGH/ROLLING IDLE .) 9 Fast idle/runs on The engine speed continues at fast idle after warm-up. The engine runs after the ignition switch is turned off.
How many adults can fit in a Mazda RX 8?
Four adults can travel in the RX-8 in relative comfort. It might be a bit snug for those in the rear seats, but it’s considerably better than other similarly priced coupes. The specification on all RX-8s was generous. All cars get alloy wheels, climate control, electric windows and electric seats. Our pick is the more powerful 228bhp version.
How to troubleshoot an RX8 rotary engine?
(w) RX8-Engine Troubleshooting Page 2 Inspection Method for Sensor Connectors or Wires 1. Connect the WDS or equivalent to the DLC-2. 2. Turn the ignition switch to the ON position (Engine off). NOTE: If the engine starts and runs, perform the following steps at idle. 3. Access the PIDs for the switch you are inspecting.
Why does my Mazda RX8 engine not start?
Just removing the spark plugs will not resolve a flooded engine concern on this vehicle. The problem is that the engine has lost compression and will not fire. You can verify you ignition system is ok by checking for spark at the plug while a friend crank the engine.
Is there a recall on a Mazda RX8?
If you have a problem with your ignition system, (no spark) that would not be covered. The recall is for warranty extension from, 5yrs 50K to 8yrs 100K, if the engine has lack of power, stalling, low compression and may not be related to your concern.
What are the features of a Mazda RX 8?
AM/FM stereo w/6-disc in-dash CD/MP3 changer -inc: 300-watt Bose sound system, (9) speakers, AudioPilot noise compensation, Centerpoint surround sound, aux input jack, digital clock Leather bolster & cloth Recaro bucket seats -inc: integrated head restraints, one touch passenger walk-in function
Can you put ATF in a Mazda RX8?
Yes ATF works good. Yes, do not just start the engine and move car 20 feet and shut off. You need to get the engine warm or hold at 4-5K rpms before shutting off. I put oil in one intake port. could not get the cap off the rear one so I put oil in the lead spark plug holes as the manual said.
Why is my Mazda RX8 rotary engine burning oil?
More than not, you will have to check your oil levels, and ensure you’re running a sufficient amount of oil. Perhaps this is the biggest problem with the rotary engine. With this engine you are burning significant amounts of oil, while it is also a challenge to seal off the different chambers.
How much horsepower does a Mazda RX8 rotary engine have?
With a manual transmission, the Mazda RX-8 rotary engine can create 232 horsepower at 8,500 rpm. According to Edmunds: “…car enthusiasts have been intrigued by the RX-series’ rotary engine and for good reason, as it has many advantages over a traditional piston engine.
Are there any problems with the Mazda RX8 engine?
During 2004-2005, there were numerous reports of RX-8 engine failure. Soon, the reputation of the engines was beginning to take shape. It was basically an engine that could only last for many owners up to 30,000 miles. Many Mazda owners were experiencing issues such as power loss.
Which is better Mazda crossfire or Mazda RX 8?
While the RX-8 is one of the purest sports cars on the road, the Crossfire is more of a GT car. Although it’s undeniably a fine car, I don’t think the Crossfire really compares to the RX-8 from a sporting point of view – plus, it doesn’t have a back seat.
Why does my Mazda RX-8 stall at 3000 rpm?
The rough idle appeared to go away after driving a long highway trip where RPM tended to remain above 3000 for long periods. I believe there are two things going on with the RX-8 AT. The engines simply need to run at least at 3000RPM to keep everything clean and clear.
What should I do if my Mazda RX-8 overheats?
Take a look around your cooling system, and then run a pressure test to locate internal leaks. This will show you where fluids may be seeping out around hoses or even cracks in the head. Your system should be able to handle 12 to 15 psi for at least 15 minutes without a loss of any pressure.