What are the fluid capacities for a Jeep Wrangler?
It’s better to prevent issues from arising then fixing them when they do. Here are the fluid capacities laid out for your Jeep JK, YJ and TJ. If you like to do your own service on your JK Wrangler you will need to know the specifications for fluid changes.
How often to check transmission fluid in Jeep Wrangler?
If you take your Jeep in regularly to have the oil changed, you can also have the service technician check the transmission fluid levels for you. Check the fluid in your Jeep Wrangler manual transmission every 3,000 miles.
What kind of transmission does a Jeep Wrangler have?
Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission.
How much oil does a Jeep Wrangler take?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type 3.8L Engine Oil 6 Quarts / 5.7 Liters 5w-20 3.6L Engine Oil 6 Quarts / 5.6 Liters 5w-20 Brake Fluid Fill to Full Mark DOT 3 Clutch Fluid Fill to Full Mark DOT 3
How much fluid does a Jeep Wrangler need?
Lower the vehicle and add the specified amount of automatic transmission fluid through the filler/dipstick tube. Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.
What kind of transmission does a YJ Wrangler have?
The 2.5 liter straight 4 w/manual transmission was always paired with the AX-5. The TF 904 automatic transmission option was only made available from 94-95. Both straight 6 motors were matched with the TF 999 for the entire production run.
When to change transmission fluid in Jeep Wrangler?
At the specified time intervals, Haynes reccomends 30,000 miles or 2 years, the transmission fluid should be drained and replaced. Since the fluid will remain hot for hours after driving, perform this procedure only after the engine has cooled down completely.
What kind of transmission did the Wrangler have in 1987?
The manual transmission from 1987-1990 was the BA-10/5, and from 1991 onwards the AX-15 was used.