Is there a way to fix no bus no gauges?
No Way Not three times with it working fine for months in between. Cut to the chase. The Connector to the PCM wiring harness at the PDC was loose! Its the one that has a bolt in the middle of a square white connector. As I started to unscrewed it I noticed that the bolt was not tight. Ah ha!
Why does my Dodge truck have no gauges?
Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.
What kind of truck has no bus gauges?
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
What should I do if my gauges go out?
I’ve had my gauges go out with the “no bus’ message in the odometer window three times now! Checked all the fused, disconnected the battery, to no avail…..Sound firmilliar?
Why is the speedometer on my liberty not working?
If you don’t have a scanner, take it to the local parts store and have them run it for you. Wiring Issues – Exposed wiring to or from the VSS can cause your Liberty’s speedometer to no longer work. This will often manifest itself after driving through heavy water. It’s worth checking to see if the fuse has blown.
Is there no bus, no gauges possible solution?
I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
I’ve had my gauges go out with the “no bus’ message in the odometer window three times now! Checked all the fused, disconnected the battery, to no avail…..Sound firmilliar?
Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.
What does the no bus sign on my car mean?
Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor. Unplug the sensor and watch your dash.
What does no bus mean on the odometer?
RECENTLY HAD “no buS” SHOW ON THE ODOMETER IN MY 2000 JEEP WRANGLER. THE VEHICLE DID START AND RAN WITHOUT A PROBLEM, BUT WHO KNOWS FOR HOW LONG. THE ONLY RECENT CHANGE WAS A NEW BATTERY. Having the same problem on my ’99 Jeep Cherokee.
How does no bus work on a Dodge Durango?
First the airbag then abs light turn on with sound signal,then speedometer stops working, then the dash mileage counter starts blinking, then the rpm gauge stops working, then the dash mileage counter shows No Bus message, then follows the low fuel light with sound signal.