Is the Mazda RX 8 a good car?
Unfortunately, the only downfall of the RX-8 is its lack of power, sure the 177kw of power and 211Nm of torque propel the car from 0-100 km/hr in just 6.2 seconds, but compared to the old Mazda RX-7s or even the Mazda 3 MPS, the RX-8 feels slow. Now why would Mazda fail to Turbo charge the RX-8?
What to do if your Mazda RX-8 engine is not turning on?
If your engine is suffering from low compression there are several engine cleaners that can possibly restore some lost compression, but in the end the only complete fix is a complete engine rebuild or replacement. If the lights anywhere in your car are not turning on, your battery may be dead.
When did the Mazda RX8 rotary engine come out?
Mazda introduced the RX-8 in 2003 and put that rotary engine back into circulation within the car market once again. Buyers purchased this compact, cute and stylish family coupe Rx8, with details such as rear-hinged back doors and sleek bodywork.
What kind of transmission does a Mazda RX 8 have?
Automatic transmission-equipped Mazda RX-8s are a bit sportier for 2006. A new paddle-shift six-speed automatic replaces last year’s four-speed transmission, and the rotary engine’s maximum horsepower has been increased for cars equipped with the automatic.
Are there any problems with the Mazda RX8 engine?
During 2004-2005, there were numerous reports of RX-8 engine failure. Soon, the reputation of the engines was beginning to take shape. It was basically an engine that could only last for many owners up to 30,000 miles. Many Mazda owners were experiencing issues such as power loss.
What’s the top speed of a 2006 Mazda RX 8?
2006 Mazda RX-8. Year: 2006. Make: Mazda. Model: RX8. Displacement: 1299cc L. 0-60 time: 7.5 sec. Top Speed: 146 mph. car segment: sports cars.
What causes carbon deposit in Mazda RX-8?
The RX-8 has a rotary engine which requires apex and side seals to seal off the “combustion chambers” within the engine. As the car is driven these seals will eventually wear down, and carbon deposit is can form on the side of the engine causing leakage between the combustion chambers and changing engine geometry.
Where does the oil go in a Mazda RX-8?
For help rotating tires please check out the Tire Rotation Guide. Engine oil in the RX-8 lubricates the moving parts of the engine, but is also injected into the rotary compression chambers to provide lubrication for the apex seals. As you drive the car the oil picks up impurities in the engine and can lose some of its lubricating properties.
The car was well received by motoring press all around the world, but as time has gone by the RX-8 has developed a bit of a reputation for being unreliable. In reality, this reputation probably has more to do with the fact that RX-8s can be purchased cheap and they are often not maintained well.
Who was the designer of the Mazda RX-8?
The project was headed up by Ikuo Maeda, the son of Matasaburo Maeda (the lead designer of the original RX-7). Approval for the RX-8 project was given on one condition, the final production car needed to have four doors. This condition was partly due to Ford’s influence (They owned a large portion of Mazda at the time).
When did Mazda change the suspension on the RX-8?
Mazda RX-8 (mid-cycle refresh) In November 2008, Mazda engineers improved the RX-8 body rigidity through the addition of structural reinforcements, by adding a trapezoidal shock tower brace and enhancing the local rigidity of the front suspension tower areas.
What kind of transmission does a Mazda RX-8 have?
Leather-wrapped steering wheel, gear knob and hand-brake lever. Jointly developed with motorsports company Prodrive, the 2006 PZ RX-8 featured a number of performance and style upgrades over the standard car. It only came with a six-speed manual transmission and was based on the 228-horsepower version of the RX-8.
The car was well received by motoring press all around the world, but as time has gone by the RX-8 has developed a bit of a reputation for being unreliable. In reality, this reputation probably has more to do with the fact that RX-8s can be purchased cheap and they are often not maintained well.
The project was headed up by Ikuo Maeda, the son of Matasaburo Maeda (the lead designer of the original RX-7). Approval for the RX-8 project was given on one condition, the final production car needed to have four doors. This condition was partly due to Ford’s influence (They owned a large portion of Mazda at the time).
Mazda RX-8 (mid-cycle refresh) In November 2008, Mazda engineers improved the RX-8 body rigidity through the addition of structural reinforcements, by adding a trapezoidal shock tower brace and enhancing the local rigidity of the front suspension tower areas.
Leather-wrapped steering wheel, gear knob and hand-brake lever. Jointly developed with motorsports company Prodrive, the 2006 PZ RX-8 featured a number of performance and style upgrades over the standard car. It only came with a six-speed manual transmission and was based on the 228-horsepower version of the RX-8.
Why did Mazda put a hold on the RX-01?
Due to the company’s financial position at the time and the growing demand for SUVs, Mazda put a hold on the RX-01’s development. However, a team of engineers kept the development of the 13B-MSP engine alive by using a modified MX-5 chassis.
Due to the company’s financial position at the time and the growing demand for SUVs, Mazda put a hold on the RX-01’s development. However, a team of engineers kept the development of the 13B-MSP engine alive by using a modified MX-5 chassis.
It’s held in poor regard compared to the one powering its predecessor, the RX-7. However, it’s possible that a more reliable Mazda RX-8 is just one modification away. The rotary engine’s drastically different design is both a blessing and a curse when it comes to performance and maintenance.
Why does my 2004 Mazda RX 8 not start?
“Owner dropped 2004 Mazda RX-8 to the dealer to fix recall, driver and passenger air bag, voluntary emission recall, and also owner complains that the engine won’t start when the engine is hot, you have wait for about 30 minutes to cool down the engine before the engine starts again. Advisor asked the owner to have the engine diagnose.
Can you add premix to a Mazda RX 8?
Since the Mazda RX-8 burns oil, too, many owners add 2-stroke premix to their fuel, RX8Club forum users report. It’s typically only recommended for those who disabled their oil metering systems for track use. However, it’s not unusual for the owners of street-driven RX-8s to add premix as well, r/RX8 sub-Reddit users report.
How much horsepower does a Mazda RX8 rotary engine have?
With a manual transmission, the Mazda RX-8 rotary engine can create 232 horsepower at 8,500 rpm. According to Edmunds: “…car enthusiasts have been intrigued by the RX-series’ rotary engine and for good reason, as it has many advantages over a traditional piston engine.
Is the Mazda RX-8 a good used car?
There are few cars in the used market that can elicit the type of emotion that you feel when driving a Mazda RX-8. The sound that its rotary engine makes when you hit the 9,000 rpm redline is intoxicating and the way the car carves through corners is sublime.
With a manual transmission, the Mazda RX-8 rotary engine can create 232 horsepower at 8,500 rpm. According to Edmunds: “…car enthusiasts have been intrigued by the RX-series’ rotary engine and for good reason, as it has many advantages over a traditional piston engine.
Since the Mazda RX-8 burns oil, too, many owners add 2-stroke premix to their fuel, RX8Club forum users report. It’s typically only recommended for those who disabled their oil metering systems for track use. However, it’s not unusual for the owners of street-driven RX-8s to add premix as well, r/RX8 sub-Reddit users report.
“Owner dropped 2004 Mazda RX-8 to the dealer to fix recall, driver and passenger air bag, voluntary emission recall, and also owner complains that the engine won’t start when the engine is hot, you have wait for about 30 minutes to cool down the engine before the engine starts again. Advisor asked the owner to have the engine diagnose.
A true sports car for under 10,000 The Mazda RX8 is an amazing car it sounds great and looks good too. It’s comfortable for a sports car and it is so much fun to drive. The reliability is below average but not terrible. It isn’t very expensive to fix the car either.
During 2004-2005, there were numerous reports of RX-8 engine failure. Soon, the reputation of the engines was beginning to take shape. It was basically an engine that could only last for many owners up to 30,000 miles. Many Mazda owners were experiencing issues such as power loss.
Why is the gear knob on my Mazda RX8 not working?
Does the gear knob on your RX-8 illuminate? If not, then there is a known issue with the wiring breaking. Mazda produced a modified version of the gear knob to resolve the problem. You will need to fit the modified gear knob to avoid this problem in future. The catalytic converter is prone to failing on the RX-8.
The RX-8 has a rotary engine which requires apex and side seals to seal off the “combustion chambers” within the engine. As the car is driven these seals will eventually wear down, and carbon deposit is can form on the side of the engine causing leakage between the combustion chambers and changing engine geometry.
What causes wheel replacement signal on Mazda RX-8?
It also could be a sensor malfunction, a wire loose, or some other minute detail that is upsetting the complex computer of the Mazda RX-8. If you have installed aftermarket wheels with different sizes front to rear, that may cause a false sensor signal to the ECU, please look at Wheel Replacement guide.
How do you warm up a Mazda RX8 engine?
You need to warm up the engine slowly, stay in low revs depending on outside temperature for at least 20 minutes. Beware you need to warm up the oil, and the gauge on your dash is the water temperature, which heats up a lot faster! After that, drive it like you stole it.
What kind of car is an automatic RX8?
Have an automatic RX8 which I purchased about 4 weeks ago. Tried to start car tonight after not using for 2 days. Car started and stalled after a couple of seconds. Then would not start again. Very upsetting considering the car has only 1500 miles. I am waiting now for roadside assistance. Will post results later.
What kind of oil does a Mazda RX 8 use?
Every city in the USA has slow traffic jams and warm weather. Every where else in the World (except in the USA) Mazda requires in the RX 8 Owners Manual the use of 5W-30 oil to adequately protect the very same hot running rotary engine that is in RX 8’s in the USA.
Why is the Mazda RX8 engine naturally aspirated?
More importantly, the revised design of the RX8’s engine enabled a naturally aspirated design. The RX8 isn’t meant to be a successor to the RX7. It’s a new model by Mazda built to appeal to younger prospects. The naturally aspirated nature made power delivery satisfactory, yet linear and predictable.
Which is the most controversial part of the RX8?
The rear fascia is perhaps the RX8’s most controversial angle, and that’s predominantly down to the taillights. A lot of people like the clear design, but some don’t. The RX8’s cabin is an example of why minimalism and simplicity are ideal for interior car design.
Are there any problems with the Mazda RX 8?
As you may know Honda, Ford, and Mercedes Benz in addition to Mazda, all have problems meeting EPA’s miles per gallon (MPG) requirements for their fleet of cars to reduce more $$$ of the huge (million $$$) fines that EPA charges.
Is the Mazda RX-8 a JDM car?
‘A Cool JDM Car’ or ‘Mazda… 2021 IMSA WeatherTech Sports… The place to discuss anything technical about the RX-8 that doesn’t fit into any of the categories below. Wanna save some coin or time/money in the shop?
How to save money on a used Mazda RX-8?
Loading… How can you save money on a used Mazda RX-8? iSeeCars analyzes over 25 billion data points to help you find the best deals. See more ways to save. Does car color affect the price of a used Mazda RX-8? iSeeCars analyzes over 25 billion data points to help you find the best deals. See more ways to save.