Is the Check Engine light on on my 2006 ml-350?

2006 ML-350 check engine light on! Hello All, I have a used 2006 ML-350 that I bought with 48K miles under warrenty. the first week the fuel sensor went out and i ran out of fuel with the gas guage indicating 1/2 full. The dealer fixed it. Now with only 55K miles the check engine light has come on & off continuoiusly (?).

Are there any problems with the Mercedes ML350?

Mercedes Benz ML350 owners have reported 24 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Pulling out into lane of traffic accelerating where car abruptly starts to run very very rough.

How to fix a check engine light on a Mercedes Benz?

Hopefully you don’t have any serious problems with your car. If it is a Mercedes Benz you can use the search function on Mercedes Medic to see if there is an article that will show you how to fix what is wrong. Once you fix the problem then you can use your scanner again to erase or reset the check engine light.

What’s the ZIP code for a Mercedes ML 350?

Enter your zip code: In its current condition, my 2006 Mercedes ML 350 is not living up to my expectations, and it should not be living up to Mercedes Benz expectations neither.

What is the diagnostic code for a Mercedes ML 350?

Mechanic diagnostic codes 1200 & 1208 2010 Mercedes ML 350. I have a 2007 clk 350 80k miles. The engine is not in the i have a 2007 clk 350 80k miles. The engine is not in the serial number range for the balance shaft issue.

What is the fault code for a 2006 Mercedes E350?

I have a 2006 Mercedes E350 with about 70k miles. The check engine light came on and the dealership diagnosed the codes 1200 & 1208. They then determined that there were metal shavings in the oil pan … read more

Is the Check Engine light on in my Mercedes?

Has the check engine light turned on in your Mercedes-Benz C-Class, E-Class, GLA, GLC, GLE, ML, or SL? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before.

What causes gears to wear prematurely in Mercedes Benz ML350?

Majeed seifi, alleged a defect in balance shaft sprockets in (v-6) engines and idle gears in (v-8) engines model year 2005-2007 mb that causes the gears to wear prematurely. Plaintiffs contend (“mbusa”) had a duty to disclose this information to consumers at the time they purchased their vehicles.

What are the common problems with Mercedes diesels?

Here are some common problems that affect many Mercedes-Benz diesel models including E350, ML350, GL350, R350, Sprinter, R320 CDI and BlueTec models. Common problems Diesel Particulate Filter. As Mercedes DPF traps and holds soot, with time it reaches a point when it needs to be ‘emptied out’. This is done by regeneration.

What happens when check engine light comes on?

Check engine lights come on and can become unsafe with no power and oncoming traffic approaching. Similarly while driving over 60mph same scenario causing cel to come on and car to disengage cruise and slow extremely fast. Very rough running and idle. Terrible feeling of being unsafe and at risk.

What does check engine light on Mercedes ML350 mean?

A check engine light can indicate a broad spectrum of problems with your 2013 Mercedes-Benz ML350. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

What to do if your check engine light is flashing?

Flashing Check Engine Light: If your check engine light is flashing, stop driving your ML350 and have it towed to your nearest mechanic – you probably have a very serious problem with your car and you risk ruining your engine by driving it.

How often should my Check Engine light be on?

Steady Check Engine Light: If your check engine light is on every time you operate your ML350, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

How to contact Mercedes Benz check engine lights?

If you any additional questions regarding check engine lights, please give us a call at (713) 489-2111 to speak with one of our teammates, or simply schedule an appointment with our online form.

What does the Check Engine light on a Mercedes mean?

There are four buttons on the left side of the steering wheel. After pushing the button, the display will reveal why the check engine light is lit. Usually it indicates that the car is due for service. Push the lower left button on the steering wheel again and the vehicle mileage will show on the display.

What causes a check engine light to come on?

Our service team can run a quick diagnostics test to check if spark plugs are the issue. If so, we can replace them. If you fail to replace your vehicle’s air filter, the check engine light can turn on. A faulty air filter will result in lower gas mileage, more emissions, and stalling in some cases.

How can I get my Check Engine light to go off?

One of the possible ways of getting your check engine light to go off is pulling off the engine control unit’s fuse and then putting it back again. Although this won’t solve the problem in newer cars, it may solve the problem in a little bit older cars, and it is easy to try. Check your repair manual to find the fuse to the engine control unit.

Why is the check engien light on on my Mercedes?

They measure the unburned oxygen. If your Check Engien Light is on because of O2 sensor you may be getting poor fuel economy as well. The input values from the O2 sensor are used to adjust the fuel delivered to the engine. You can get O2 sensors at a fraction of dealer prices on Amazon, that will fit Mercedes Benz. Check this one here for example.

What does the Check Engine light mean on a Mercedes E350?

If the check engine light in your Mercedes-Benz E350 starts flashing, that means that the problem needs hasty attention and your Mercedes-Benz should be brought in urgently. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

Why is my Check Engine light still on after filling up?

The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under the correct pressure. If your check engine light turns on immediately after a fill-up, pull over and make sure the cap isn’t loose — or still on your car’s roof.

What do you do when the Check Engine light comes on?

What do you do when you’re driving along in your Mercedes-Benz E350 and suddenly, a yellow light illuminates on your dash and says “Check Engine”. If you’re like most Mercedes-Benz owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react.

How to check check engine light on Mercedes medic?

If you want to do more research then use Search function on Mercedes Medic or any other search engine to get a better idea of the problem. On any search engine enter the manufacturer and the code you got from the scanner. For example: Mercedes-Benz P0300

What causes check engine light on Mercedes Benz?

Fortunately Mercedes-Benz of Houston Greenway is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.

What does it mean when your check engine light stays off?

Once you fix the problem then you can use your scanner again to erase or reset the check engine light. If the problem has been fixed the Check engine light will stay off. If it comes back again that mean the problem has not been fixed or there is another problem.

How to check your Mercedes Benz service engine?

If you are having trouble with a Mercedes Benz then go to mercedesmedic.com/ faultcodes/ to get an idea of what your problem is. If you want to do more research then use Search function on Mercedes Medic or any other search engine to get a better idea of the problem. On any search engine enter the manufacturer and the code you got from the scanner.

Is there a warranty on a 2006 Mercedes ML350?

(Service and Warranty information 2006 M class pg. 1). Being the owner of an ML350 with 40,000 miles an average of 4,000 miles yearly; the car has hardly even been driven and should not be experiment engine problems.

Is the Mercedes ML 350 a good car?

In its current condition, my 2006 Mercedes ML 350 is not living up to my expectations, and it should not be living up to Mercedes Benz expectations neither. Mercedes Benz describes itself as dedicated to providing an unparalleled commitment to excellence in sales and service, doing everything possible to live up to this promise.

When does the Check Engine light come on?

The check engine light only comes on in certain conditions: If the check engine light is coming on intermittently, be sure to notice any changes in the performance of your vehicle when the light is on. If you do notice a difference, try driving your vehicle as little as possible until you can bring it in for service.

If you any additional questions regarding check engine lights, please give us a call at (713) 489-2111 to speak with one of our teammates, or simply schedule an appointment with our online form.

What happens when the camshaft position sensor fails?

Once your car’s computer detects a CMP sensor failure, it will trigger the engine light and store a diagnostic trouble code (DTC) in its memory (see the table below for common camshaft position sensor trouble diagnostic codes). As you may expect, the specific location of the camshaft position sensor varies by a vehicle’s make and model.

How much does a bad camshaft sensor cost?

In this case, because of an inaccurate reading from a bad camshaft position sensor, more fuel than necessary is injected into the engine which causes your fuel economy to drop. To replace a camshaft position sensor, you can expect to pay anywhere from $120 to $300. Parts alone will run about $50 to $200.

When does the camshaft position sensor need to be replaced?

If you have any of these symptoms, it could mean the camshaft position sensor needs to be replaced by a professional mechanic as soon as possible. It needs to be completed before the engine cuts out and dies while you are driving, or does not start at all. 2. Check Engine Light comes on

What to do if you have a camshaft problem?

Visually checks the electrical connections to the camshaft sensor, oil control solenoid valve, and crankshaft sensor for loose connections, damaged wiring harness, or any other issues that may cause a problem. Makes sure the engine oil is full of clean correct viscosity oil.

Where is the Check Engine light on a Mercedes?

Pay attention to the display on the instrument cluster between the speedometer and the tachometer. Press the lower left button on the left side of the steering wheel. There are four buttons on the left side of the steering wheel. After pushing the button, the display will reveal why the check engine light is lit.

What do you do when check engine light is lit?

Press the lower left button on the left side of the steering wheel. There are four buttons on the left side of the steering wheel. After pushing the button, the display will reveal why the check engine light is lit. Usually it indicates that the car is due for service.

What does it mean when your check engine light is on?

In return, the Engine Control Unit (ECU) will trigger a fault code which typically is in the following format P0001. You can look-up these codes yourself to find out what they mean. Follow these steps to troubleshoot your Check Engine Light (CEL), also known as the Service Engine Soon light.

When does the Check Engine light come on on a Mercedes?

It illuminates when something requires the attention of a mechanic, or to remind you of periodic service needs. The light is designed to come on when the vehicle passes certain mileage limits. You can reset the “check engine” light on your Mercedes within a few minutes.

How many miles can a Mercedes Benz go?

These cars were bulletproof though. They could easily go over 200k miles on original transmission and engine. The only issues you will see with these cars is a bad brake light switch (easy and cheap to fix yourself), ball joints, engine mounts and maybe an automatic transmission valve body repairs.

What are the problems with a 2006 Mercedes Benz E350?

1 Balance Shaft Failure 2006 E350 Average Cost to Fix: $4,800 Average Mileage: 85,000 mi 2 Leaking Fuel Tank Gasket 2006 E350 Average Cost to Fix: $1,200 Average Mileage: 84,000 mi 3 Car Jerks When Downshifting 2006 E350

What causes a Mercedes Benz check engine light to go off?

These faulty gears wear out prematurely, excessively, and without warning, causing the vehicle to malfunction, the ‘check engine light’ to remain illuminated, and the vehicle to misfire or stop driving. A lawsuit was filed against Mercedes-Benz, and you can read the details below. 1 Timing chain failures can cause catastrophic engine damage.

How to check the authenticity of a Mercedes Benz?

This online service allows a user to check the validity of the car and get detailed information on almost any VIN number, search for Mercedes-Benz car parts and check the car’s history. The VIN also allows a user to get a build sheet of Mercedes-Benz.

What was the problem with the Mercedes E350 in 2006?

Mercedes-Benz balance shaft failure The biggest problem owners reported with the 2006 Mercedes-Benz E350 was with the 24-valve DOHC 3.5-liter V6 engine in the 2006 E350. 2006 was the very first year they used this engine in the E-Series vehicles, and the engines have been re-engineered since then.

Can you read the fault code on a Mercedes Benz?

Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS

What kind of engine does Mercedes Benz E350 have?

The biggest problem owners reported with the 2006 Mercedes-Benz E350 was with the 24-valve DOHC 3.5-liter V6 engine in the 2006 E350. 2006 was the very first year they used this engine in the E-Series vehicles, and the engines have been re-engineered since then.

How to check automatic transmission fluid level Mercedes?

The transmission dip stick should show level between the low and high 80 degree mark. Add Mercedes Benz approved transmission fluid. If you find out that you are low in fluid then make sure to add some. You add fluid through the same tube that you used to check the transmission fluid level.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

When does the engine management warning light appear?

Engine Management Warning Light (Diesel Engines Only) If the light appears when the ignition is switched on, this is a normal function (to appear for a few seconds). If the light appears whilst the engine is running drive slowly and carefullyto an authorised repairer immediatelydue to engine management fault.

What causes a cylinder to misfire in a Mercedes?

In most cases, a cylinder misfire is caused either due to old spark plugs that need to be replaced. A failed ignition coil or a bad spark plug wires. If none of the above fixes your misfire problem carefully analyze the fault codes, it is possible that misfire may be indirectly caused by another problem in the engine.

Where are misfire codes stored in a Mercedes?

Luckily for you, the misfire codes are stored in the ECU and are very easy (and inexpensive) to retrieve. To diagnose an engine misfire on a Mercedes all you need is a generic OBD II code reader that can be bought in some cases for under 20 at your local auto parts store or on Amazon’s Best Selling OBD II scanners list.

What to do if Mercedes check engine light is on?

1. Turn ignition to position II. All dash lights should be on. Don’t start the car. 2. Locate the OBD-II port under the dashboard. Location of OBD II port used to retrieve Mercedes-Benz fault codes. 3. Plug your OBD II scanner and let it turn on. Use an OBD II scanner to check why the Check Engine Light is ON.

Why is my Mercedes-Benz ML350 check engine light stays on?

Let’s be fair my ML350 has these defective parts in the motor which can create a safety issue by abruptly stopping while driving. With only 40,000 miles it’s only fair that MB provides the repairs needed. While Mercedes Benz has never admitted to this defect, the balance shaft identified as a manufacturing defect.

Enter your zip code: In its current condition, my 2006 Mercedes ML 350 is not living up to my expectations, and it should not be living up to Mercedes Benz expectations neither.

Can a bad crankshaft sensor cause a check engine light?

Another issue of a potential problem with the crankshaft position sensor is an illuminated Check Engine Light. If the computer detects a problem with the crankshaft position sensor’s signal, it will activate the Check Engine Light to alert the driver of the problem. A Check Engine Light can also be set off by a wide variety of other issues.

What happens if the crank position sensor fails?

Failed crankshaft position sensor can also impact the idling, the acceleration, or even your transmission shifting. In some cases, it can cause your transmission to go into limp mode. You may also notice an increase in engine vibrations. The check engine light is usually illuminated on your instrument cluster.

Where can I find the Mercedes Fault code?

Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes. The codes above are retrieved by plugging a diagnostic scanner into the OBD-II port located under the dash, and scanning for fault codes. Location of OBD II port used to retrieve Mercedes-Benz fault codes.

How many control units does a Mercedes Benz have?

There are also codes for other control units such as transmission, ABS, SRS, ESP, 4ETS, airbag, A/C. Mercedes-Benz can have up to 47 control units. You can NOT diagnose them with a simple OBD-2 scanner. To read these systems and their fault codes or erase them from your Mercedes-Benz you need more advanced OBD-II scanners.

What does a flashing check engine light mean?

A flashing light indicates that the problem is thoughtful and if not taken care of urgently may result in leading damage to the vehicle. If the check engine light in your Mercedes-Benz E350 starts flashing, that means that the problem needs hasty attention and your Mercedes-Benz should be brought in urgently.

What happens when the ECM light turns on?

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it’s a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Mercedes-Benz auto repair mechanics at Plaza Motor Company.

What kind of mileage does a Mercedes Benz get?

They could easily go over 200k miles on original transmission and engine. The only issues you will see with these cars is a bad brake light switch (easy and cheap to fix yourself), ball joints, engine mounts and maybe an automatic transmission valve body repairs. E-Class is another Mercedes-Benz model that doesn’t mind the high mileage.

Navigation