Is the brake light switch located?
Where is a Brake Light Switch Located? As part of the brake-pedal assembly, you can find this switch under the dashboard or on the firewall near the top of the pedal lever. Replacing one is easy.
Can a brake light switch cause transmission problems?
A bad brake light switch, for example, can trigger the ABS and traction control lights, but it can also prevent engine start or even transmission shifting. Also, a bad brake light switch can trigger the ABS lights and traction control lights to stay on.
How can you tell if a brake light switch is bad?
Place the sensor on just one of the two wires and hold the brake pedal down as you do so. Then test the other wire. If power is connected and the switch is working properly, the test bulbs will illuminate. If it doesn’t light up, the brake light switch is faulty and will need to be replaced.
What would cause my brake lights not to work?
If one or more of your brake lights isn’t working properly, it could mean one of three things: The brake light system fuse is blown, the brake light bulbs are burned out or the brake light wiring switch is broken. All of these issues are easy to troubleshoot.
Where is the brake light fuse located?
power distribution center
Like all fuses, the brake light system fuse can be found in the power distribution center, which is under the dashboard or tucked away underneath the hood. Never heard of the power distribution center? It’s just the technical name for a fuse box.
Can both brake lights go out at the same time?
Bad Brake Light Switch When the brake pedal gets pushed, a switch is triggered to send a signal to the lights out back that it’s time to turn on. If all three brake lights are out at the same time, it’s unlikely that the trio of bulbs died simultaneously. In this case, it’s more likely a bad brake light switch.
Is there a recall on a Subaru brake light switch?
Brake Lamp Switch Recall At the end of February 2019, Subaru recalled brake light switch in 2.3 million vehicles, including the 2013-2017 Crosstrek, 2014-2016 Forester, 2008-2016 Impreza (4-door), 2012-2016 Impreza (5-door), and 2008-2014 WRX (4-door).
Is there a problem with the brake light switch?
In November of 2016, Subaru released a Technical Service Bulletin (TSB) outlining a design change to the brake light switch to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. To fix the problem, Subaru introduced a new switch with fluorine grease to lubricate the plunger and prevent silicone contamination.
What to do if your brake light goes off?
In some cases, it may also disable the anti-lock brake (ABS) system and some important safety features, including EyeSight driver assist and vehicle dynamics control (VDC). The vehicle should display an appropriate warning light, if any of the above systems malfunction.
Is there a recall on the new Subaru?
Owners may contact Subaru customer service at 1-800-373-6614. Subaru’s number for this recall is WUE-90. Owners may also contact the NHTSA Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. The NHTSA Campaign Number for this recall is 19V149000.