Is it safe to drive with maintenance light on?
It’s important to know that the light itself doesn’t mean that your car is damaged, so you can still safely use your vehicle while the light is on in your dashboard.
How do you clear the maintenance required light on a Toyota Camry?
Reset Maintenance Light: Toyota Camry Instructions
- Put your key in the ignition and flip to position one.
- Push and hold the dashboard odometer button and turn the key to position two.
- Keep holding the odometer button until the maintenance light starts to flash.
- Let go of the odometer button and start your car.
What to do when maintenance required light comes on?
Once the regular odometer readings are back on the screen, you can release the reset button and turn your car on. The maintenance required light should not appear on your dashboard anymore. If the light still appears, repeat the procedure again until the maintenance light goes away from your dashboard.
What does the maintenance required light on a Toyota mean?
This Japanese automobile manufacturer is known for producing some of the most reliable vehicles in the world, but sometimes, even Toyotas flash a maintenance required light on their dashboard. This is true for all new Toyota models and it’s a light the driver shouldn’t ignore. Have you seen the light flashing on your car’s dashboard as well?
What’s the difference between a check engine light and maintenance required light?
Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.
When does the maintenance required light come on?
Every time you start the car, the maintenance required light will turn on for about six seconds to test the bulb, and then go out. A flashing maintenance required light comes on after 4,500 miles. This is an alert for you to make an appointment for car service because you are getting close to the 5,000-mile service interval.
What to do when Red service light comes on?
Welcome to TPF and there will be someone along to help soon Im sure. Ditto on getting the bleach in there now. You’ll probably fix your problem once you clean the cell. You don’t need the caps to clean the cell some. You can pour the vinegar through the cell into a bucket. It’ll dissolve any deposits.
Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.
How to reset maintenance required light on Toyota?
Follow this procedure to reset the maintenance required light on most early-model and late-model Toyota vehicles ( with video ): 1. Turn the ignition switch to the ON position. 2. Set the Odometer/Trip Display to the ODO mode (early model) or to Trip A (late model). 3. Turn the ignition switch to the OFF position. 4.