Is a harmonic balancer expensive?
Cost of Harmonic Balancer Replacement On average for most vehicles, it can cost about $200 to replace a harmonic balancer. The cost of replacing the harmonic balancer varies mainly due to the type and model of the vehicle and the type and brand of parts used.
How much does it cost to replace a harmonic balancer?
A factory replacement part costs about $261 and a Dayco part costs about $111. The total harmonic balancer replacement cost would be around $251 using OE parts and about $201 using aftermarket parts. For a 2014 Jeep Wrangler with a 3.6-liter engine, the estimated labor time is around 0.7 of an hour.
What is the function of a harmonic balancer?
Key Takeaways! 1 A harmonic balancer is a crucial part of your vehicle’s engine, and the life span of your crankshaft depends on it. 2 The balancer has a principal function of the dampening effect on the vibrations coming from the engine. 3 A harmonic balancer or damper must be interference fit to the crankshaft.
Why does my car not run with a harmonic balancer?
These vibrations from the engine can become too much for the crankshaft to bear, causing it to fail. And when that happens, your car won’t run and you’ll be facing some expensive repairs. This is where the harmonic balancer comes in.
How do you remove a harmonic balancer from a crankshaft?
In a general sense, removing your harmonic balancer, you will have to take out the belt from the crankshaft pulley. After which, you will then remove the harmonic balancer mounting bolt off with a socket and ratchet. After removing them, you will need to use the harmonic balancer puller.
How much does it cost to replace harmonic balancer?
Replaced the balancer along with the bottom pulley for about $800 at the dealer. Hasn’t squealed since. I also had a squeal and replaced the belt but then the squeal came back so then I replaced the top pulley and you guessed it the squeal came back and the balancer did wobble.
In a general sense, removing your harmonic balancer, you will have to take out the belt from the crankshaft pulley. After which, you will then remove the harmonic balancer mounting bolt off with a socket and ratchet. After removing them, you will need to use the harmonic balancer puller.
What are the symptoms of a bad harmonic balancer?
The harmonic balancer is made up of top quality rubber and metal. The combination ensures the energy is properly absorbed and the balancer stays young for a long time. 1. Increased Engine Vibration 2. Disrupted Timing Marks 3. Detached Harmonic Balancer 4. Loud Noise from the Engine Bay