How wide should picture frame moulding be?
Decide on an Appropriate Width of Moulding The width of the moulding is the distance across the face, the part that is facing outward when the frame is hanging on the wall. As a rule of thumb consider frame widths of 3/4″ to 1-1/4″ for frame sizes from 8″x10″ to 15″x19″.
How do you measure picture frame molding?
You have to account for all eight cuts to properly measure the length of your picture frame moulding. To do this, multiply the width of your moulding by eight. For example, if you are using a 2″ moulding, you multiply two and eight to get 16.
What is a fillet for framing?
In the picture framing industry, a fillet (also referred to as a slip) is a small piece of moulding which fits inside a larger frame or, typically, underneath or in between matting, used for decorative purposes.
What are frame spacers?
Picture frame spacers are small pieces of plastic that are placed around the edge of the glazing and sit between the glazing and the art. They come in a variety of sizes to allow for different levels of air cushion.
How do you cut frame spacers?
The spacers can be cut easily and cleanly using electrician’s pliers, a sharp knife blade, shears, or anvil pruners. To prevent crushing the spacers when cutting, turn them on their edge rather than laying them flat. Cut the spacers for the top and bottom first, then measure and cut spacers for the sides.
What is a picture frame slip?
SLIPS are usually a flat piece of wood or plastic with no rebate. They “slip” under the rebate lip of the main picture frame to offer a decorative edge and / or to extend the inner edge of a frame behind which the mounted artwork or canvas block sits.
What does rebate mean in picture framing?
Rebate. Rebate (or rabbet): The inner cut out ‘lip’ of a frame (moulding) in which the glass, mount, artwork, and backing are held into the frame by. Rebates are quantified by width and depth sizes.