How wide is a Toyota rear axle?
Toyota Axle Widths
| Vehicle models | Front or Rear | Width, WMS to WMS |
|---|---|---|
| Toyota pickup/mini and 4Runner | Rear axle | 58″ |
| Rear axle | 58.5″ | |
| Toyota pickup/mini 2 wheel drive | Rear axle | 56″ |
| Toyota T100 | Front axle | 65″ |
How wide is a Toyota Hilux differential?
The closest fit for an Escort is the Hilux 2WD diff from RN10, RN15, RN20 & RN25 models manufactured during the first half of the 70’s. Each of these has the same spring centres (940mm) and overall width (1350mm) as an Escort.
What does track width mean?
Wheel track, track width or simply track refers to the distance between the centerline of two wheels on the same axle. In the case of an axle with dual wheels, the centerline of the dual wheel assembly is used for the wheel track specification. Axle and wheel track are commonly measured in millimetres or inches.
How wide is a Dana 60?
Dana 60 Specs
| Years Produced: | 1955 – current |
|---|---|
| GAWR: | up to 6,500 lbs |
| Overall Width: | 69.339″ flange to flange |
| Ring Gear: | 9.75″ |
| Axle Spline Count: | 16, 23, 30, 32, 35 spline (35 most common) |
How wide is a 8.8 Ford rear end?
8 rear end width iS59 11/44 inches. The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in the model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle.
How wide is a Ford Bronco rear end?
Products specifications
| Vehicle Fitment | 1967 thru 1977 Ford Bronco |
|---|---|
| Wheel Bolt Pattern | 5 on 5 1/2″ with 1/2″ studs installed |
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a Ford Ranger 8.8 rear end?
The ford ranger 8.8 Has a rear end width of 56.5 To 58.5″ Depending on the model.
How does Ford measure track width?
Measure across the tires on one axle from the outside of the tread on one tire to the inside of the tread on the tire on the other side of the vehicle, using a tape measure. This measurement is the track width.
How big is the rear end of a car?
Approximate rear end widths measured from backing plate to backing plate. Add Width to compensate for drums as follows: 4″ – 5″ for small cars 5″ – 6″ for intermediate cars 6″ – 8″ for large cars
How big is the front axle on a Toyota truck?
For Toyota trucks and 4Runners, there is one front axle width, and it is not wide. This is solved with: Spacers – Not great, sometimes illegal, and may wear out your front end sooner. IFS hub swap – Gets you about 3” more width. Aftermarket axle housing – Requires a longer “long-side” inner axle shaft.
What does a 9 inch rear end do?
The Ford 9 inch housing is a semi-floating, drop-out axle. Because of their strength, you’ll see these 9 inch rear ends used in just about every make of car, truck, and customs. Ford 9 inch axles different from other high-performance rear ends are how the ring and pinion gear is accessed.
How big is the rear axle on an Advance Design Truck?
Advance Design Trucks seem to be using rear ends with widths ranging from 58″- 62″. I’m not sure of the Task Force width ranges at this time. Contributing information were Bob Welch, J Forbes and various locations throughout the Web and Automotive Magazines. Rear Axle Measurements.
https://www.youtube.com/watch?v=OQ3lDNcjqqs