How to troubleshoot Honda Accord left rear wheel speed?
: Left-rear Wheel Speed. Sensor Circuit Malfunction 1. Turn the ignition switch to ON (II). 2. Clear the DTC with the HDS. 3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again. 4. Check for DTCs with the HDS.
How to troubleshoot DTC in a Honda Accord?
1. Turn the ignition switch to ON (II). 2. Clear the DTC with the HDS. 3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again. 4. Check for DTCs with the HDS. Is DTC 11-13,13-13, 15-13, and/or 17-13 indicated? YES -Go to step 5. NO -lntermittent failure, the system is OK at this time.
How to troubleshoot VSA system in Honda Accord?
6. Disconnect the VSA modulator-control unit 36P connector (see step 3 on page 19-137). 7. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA moduIator-controI unit 36P connector individually (see table).
: Left-rear Wheel Speed. Sensor Circuit Malfunction 1. Turn the ignition switch to ON (II). 2. Clear the DTC with the HDS. 3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again. 4. Check for DTCs with the HDS.
1. Turn the ignition switch to ON (II). 2. Clear the DTC with the HDS. 3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again. 4. Check for DTCs with the HDS. Is DTC 11-13,13-13, 15-13, and/or 17-13 indicated? YES -Go to step 5. NO -lntermittent failure, the system is OK at this time.
6. Disconnect the VSA modulator-control unit 36P connector (see step 3 on page 19-137). 7. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA moduIator-controI unit 36P connector individually (see table).
What is the OBDII code on a Honda Accord?
P0133 is a common OBDII code that occurs in many vehicles, including the Honda Accord. The code is triggered when there is an issue with the response time from the oxygen (O2) sensor when switching voltage levels. The O2 sensor is responsible for helping the ECM meter oxygen levels in the exhaust in order to create the ideal air/fuel mixture.
What kind of problems does a Honda Accord have?
185-horsepower 2.4L I4 7-speed shiftable CVT FWD The Honda sensing system flashed a warning and all the related warning lights came on. Cruise control stopped working. Left the car at the dealer overnight to get diagnosed and was told the system was reset.
How can you tell if a fuse has blown on a Honda Accord?
Determine from the chart and, or the diagram on the fuse box lid, which fuse or fuses control that component. Check those fuses first, but check all the fuses before deciding that a blown fuse is not the cause. Replace any blown fuses and check the component’s operation. Turn the ignition switch to LOCK (0).