How to test your car door lock actuator?
HOW TO TEST DOOR LOCK ACTUATOR – YouTube CAR DOOR DOES NOT UNLOCK LOCK WITH REMOTE. HOW TO TEST DOOR LOCK ACTUATOR If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Why does my car door not unlock with the remote?
If your car door does not lock or unlock with the remote or power button it is very likely that you have bad door lock actuator. There could be many reasons why your door may not lock or unlock, that is why we decided to make a video and show you how to test your door lock actuator so you know for sure if your door lock actuator is bad or good.
Why does my Toyota door lock not work?
Have you tried pressing the unlock button 2 times quickly to see if the second press unlocks the other doors; this is how my Toyota works. If the door locks work with the driver door switch, then this is probably not an electrical problem and more along the lines of an options setting.
Why does my Honda Accord lock not work?
Power door lock does not work with remote – need help! I have a 2005 Honda Accord EX with power window locks operated from a key fob. One of the doors has a problem with the locking mechanism and does not respond to lock/unlock key presses from the fob.
How to remove power lock actuator from Toyota?
Remove the wire harness connector off the power lock actuator by depressing the release tab firmly on the wire harness connector and then pulling firmly on the connector to unplug it. May have to use a mirror so you can see where the release tab is at on the wire connector.
Why does my car door not lock when I turn the key?
I would double check that the inside door handle is not tugging at the latch mechanism and also that the outside key rod is properly clipped into the plastic retainer on the door latch itself. It could be keeping the manual lock part of the actuator depressed and keeping it from locking.
How to replace driver’s side power in a Toyota?
Loosen but DO NOT REMOVE the top nut to the left window channel. You just want to loosen it enough so that you can move it around. 5.) Remove the link rods from their retainers which are attached to the latch assembly that go to the interior door lock and interior door opener levers.