How to replace starter clutch on Yamaha Star 1100?
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: hiROB1ahsL_Z4Ya8) An error occurred while retrieving sharing information. Please try again later.
Why is my starter not working on my Virago?
In fairness to Yamaha, many starter problems are created by the owner. There are all types of repair designed by Virago owners. Those repairs along with suggestions from Yamaha are the subject of this report. First we have the symptoms. You know, those things that either happen or don’t happen when you hit the starter button.
Where is the starter ring on a Yamaha Virago?
These parts are located inside the left side cover. Yamaha does not recommend welding the starter ring gear because if the engine should backfire you could do serious damage to the case.
Why is my Yamaha V Star 1100 not working?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: hiROB1ahsL_Z4Ya8) An error occurred while retrieving sharing information.
Why is my starter not working on my V Star?
When the starter button was pressed, all you heard was the starter motor running, and not the normal engine cranking sound like you would normally hear. It turns out that this is a very common problem on the V Star model. The design of the starting system incorporates a starter gear that is always engaged with the engine.
How can I tell if my starter motor is damaged?
With either type of starter, if you find no fault, it may be the flywheel that is damaged. There may be marks on the flywheel and corresponding ones on the pinion teeth. You can often check the flywheel teeth by removing the starter motor and viewing them through the aperture while a helper turns the engine.
How does the starter work on a Yamaha V Star?
It turns out that this is a very common problem on the V Star model. The design of the starting system incorporates a starter gear that is always engaged with the engine. Yamaha uses a one way clutch to disengage the starter once the engine is running.
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: hiROB1ahsL_Z4Ya8) An error occurred while retrieving sharing information. Please try again later.
It turns out that this is a very common problem on the V Star model. The design of the starting system incorporates a starter gear that is always engaged with the engine. Yamaha uses a one way clutch to disengage the starter once the engine is running.
Why is my V Star 1100 not starting?
Other threads in the forum indicate that you should never open the throttle when starting; otherwise it will cause kickback which will damage your starter clutch. Also low octane few is said to be a contributing factor. Hope this helps. I have the same bike 2003 V-Star 1100 Custom, and it is doing exactly what caiken above was describing.
How do you change the clutch on a V-Star?
Put the bike up on a lift or support it with 2×4’s. 1. Drain the oil, and remove the starter motor 2. Remove the rear cylinder head cover to open up to the cam gear area. 3. Remove the kick stand and then the transmission cover. 4. Now remove the little cover where the clutch cable goes into and unhook the clutch cable.
How to replace a V Star starter clutch?
How-To: V Star Starter Clutch Replacement (Sample) – YouTube http://www.howtomotorcyclerepair.com/vstarstarterclutch/Click link above for full length video and FREE service manual.The starter clutch or one way clutch f…
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: hiROB1ahsL_Z4Ya8) An error occurred while retrieving sharing information.
How do you change a starter in a V-Star?
1. Drain the oil, and remove the starter motor 2. Remove the rear cylinder head cover to open up to the cam gear area. 3. Remove the kick stand and then the transmission cover. 4. Now remove the little cover where the clutch cable goes into and unhook the clutch cable.
How to replace a clutch on a V-Star bike?
WORK ALONG WITH YOUR REPAIR MANUAL. READ EVERYTHING THROUGH FIRST First, get your bike in a good working position. You will be removing the left side crankcase cover, small clutch arm housing cover, kick stand, and the transmission cover. Put the bike up on a lift or support it with 2×4’s.
When to press the starter button on a V Star 1100?
When starting your V Star 1100, it is better to leave the starter button depressed until it starts, or up to around 15-20 seconds. Pressing it for just a few seconds and letting off you are more likely to cause the motor to kick back and damage your starter clutch.
What’s the best way to start a V Star?
When starting your V Star 1100, it is better to leave the starter button depressed until it starts, or up to around 15-20 seconds. Pressing it for just a few seconds and letting off you are more likely to cause the motor to kick back and damage your starter clutch. 1.) NEVER use the throttle 2.)
When did the shumandala VStar 1100 starter come out?
Only 3 left in stock – order soon. SHUmandala Starter Relay Solenoid for YAMAHA 450 YFZ450 YFZ45 2004-2008/XVS1100 V-STAR 1999-2009/YZFR1 YZF-R1 2002-2006 2009/XV1700 XV17 ROAD STAR WARRIOR 2002-2009/YZF600 YX600 YZF-R6 YFZR6 1995-2007 .