How to repair timing chain on Hyundai Santa Fe?
Continuous bead of sealant should be applied to prevent any path of oil leakage. The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain cover to be in exact position.
What should I do about my Hyundai Santa Fe?
Repair procedures Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Mechanical System / Timing System / Timing Chain. Repair procedures 1. Remove the cylinder head cover. 2.
How to repair a Hyundai Santa Fe fuel pump?
To avoid damage, unplug the wiring connectors carefully while holding the connector portion. Mark all wiring and hoses to avoid misconnection. In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel.
What should I put on my timing chain cover?
After applying liquid sealant Loctite 5900H or equivalent on the timing chain cover. The part must be assembled within 5 minutes after sealant was applied. Continuous bead of sealant should be applied to prevent any path of oil leakage.
How to install timing chain cover on Hyundai Santa Fe?
1. Install the timing chain cover. Using a gasket scraper, remove all the old packing material from the gasket surfaces. The sealant locations on chain cover and on counter parts (cylinder head, cylinder block, and ladder frame) must be free of engine oil and etc.
Repair procedures Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Mechanical System / Timing System / Timing Chain. Repair procedures 1. Remove the cylinder head cover. 2.
How to fix fuel leak in Hyundai Santa Fe?
After assemble the fuel line, turn on the ignition switch (do not operate the starter) so that the fuel pump runs for approximately two seconds and fuelline pressurizes. Repeat this operation two or three times, then check for fuel leakage at any point in the fuel line. Refill radiator and reservoir tank with engine coolant.
After applying liquid sealant Loctite 5900H or equivalent on the timing chain cover. The part must be assembled within 5 minutes after sealant was applied. Continuous bead of sealant should be applied to prevent any path of oil leakage.