How to repair Airmatic pressure line number model 219?
AR32.22-P-2001-02TX Repairing AIRmatic pressure line connection Air suspension Number Designation Model 219 with AIRmatic code 489 BA32.22-P-1002-03APressure line of air suspension to central Nm 2 reservoir BA32.22-P-1004-03APressure line, air suspension to compressor Nm 2 BA32.22-P-1006-03APressure line of air suspension to valve unit Nm 2
How to remove air line from air suspension compressor?
Remove the plastic air line that goes into the air compressor. Using a 10 mm wrench, turn the bolt counterclockwise. Once the bolt is loose, pull out the air line.
How many bar does air suspension compressor need?
You can use a multi-system diagnostic scanner such as Autel MaxiCOM to activate the air suspension compressor for 40 seconds. The compressor needs to between 16 and 35 bar in that time frame. If your Mercedes-Benz air suspension compressor does not generate 16 bar in 40 seconds, it is faulty or a major air leak.
Which is Arnott air suspension compressor do you use?
You can either choose from Arnott remanufactured struts which provide O.E. functionality or Arnott designed and assembled brand new replacement air springs, struts, shocks, or air suspension compressors. I purchased a knock-off compressor for my XJR. It put out plenty of air but was really noisy.
How to repair a pressure line on an air suspension strut?
Shown on air suspension strut P32.22-2320-06 1 Remove pressure line connection (1a) from the component in 4 Insert the repair line (2) up to the stop or to a depth of 19.5 mm question (e.g.air suspension strut) and cut off pressure line (4) in the pressure line connector (3). to a suitable length using a knife .
Where are the levels on a Mercedes Benz Airmatic system?
The levels sensors are mounted on a bracket near the upper control arms on the front of the vehicle. Each sensor is connected to a link rod attached directly to the upper control arm. The sensors produce a voltage that the Airmatic Control Module translates to axle height.
How does the Mercedes-Benz Airmatic suspension work?
The suspension is also adaptive and automatically switches the damping profile to Sport 1 above 100 mph. The compressor provides the system pressure for raising the vehicle as well as a pressure relief valve for lowering it. The compressor relay is responsible for starting and stopping the compressor.