How to remove ignition switch from Harley Davidson touring?
Step 1 – Turn your handlebars left to full lock 1 Figure 1. Feel for the tab under the ignition lock, bottom right corner. 2 Figure 2. Turn the key and press up on the tab to release the ignition lock and key way. 3 Figure 3. Be sure to position the spring first and then the ignition in the locked position first when reinstalling it. More …
Is there a video to replace the ignition switch?
I have a 2015 Electro glide, the cap turns to unlock position but the pin does not move. Is there a video that shows how to remove the switch housing to replace the actual switch ?
Can a bad ignition switch cause a car not to start?
However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.
What is the voltage on the ignition switch on a Harley Davidson?
With everything connected and the ignition on, there is a voltage on the black w/red output wire from the start switch to the relay. That voltage wonders from near zero to 10-11 volts. The starter engages as the voltage increases. Ideas?
Why is my Harley Davidson Ultra Classic not starting?
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.
Can a unworn key turn an ignition cylinder?
Or, an unworn key may not turn a worn ignition cylinder, as they haven’t “worn together.” How To Fix It: The best way to do this is to get a new lockset, with new keys and a new cylinder. You might consider getting a matched lockset that includes the door and trunk cylinders.
How is the ignition switch connected to the trunk?
You might consider getting a matched lockset that includes the door and trunk cylinders. The ignition switch itself is connected to the ignition cylinder by a shaft or lever. Inside the ignition switch, several contacts connect vital electrical systems needed to start and run the car.