How to charge the battery in a Mazda 3?
Long-press the i-stop OFF switch for 3 s within 5 s after switching the ignition ON. 4. Start the engine. 5. Press the i-stop OFF switch. Verify that the i-stop indicator light (green) flashes and stays flashing.
When to charge the battery in a new car?
Problem in new cars is that to save every drop of fuel the alternator is usually not charging the battery even during longer trips and it charges battery only when you use engine braking downhill or nearing to crossroad, or when the battery is almost unable to start the car. Click to expand…
Why is the istop not working on the Mazda 3?
The iStop still doesn’t operate since the battery condition indicator on the status display isn’t lit. The battery is fully charged so there must be some other control logic in play which is preventing iStop operating. Any ideas? Any ideas?
What does 12.6V mean on battery charge?
Normally 12.6V indicates a well charged battery but a specific gravity of c. 1.20 at 10 deg C indicates a battery at only 50% charge which is probably why the iStop isn’t operating. For iStop to operate, I understand the battery charge has to exceed 75%.
Long-press the i-stop OFF switch for 3 s within 5 s after switching the ignition ON. 4. Start the engine. 5. Press the i-stop OFF switch. Verify that the i-stop indicator light (green) flashes and stays flashing.
What to do if your Mazda3 won’t start?
One way to do this is to start your car and let the engine run for a while to recharge the battery. One thing to know: if the battery is over 4-5 years old, it may be completely dead, so it will not recharge and the car will not restart after you turn it off. In this case, you may need a new battery.
Why does my Mazda 3 battery go off when I shut it off?
My battery needed jumping on my new Mazda 3. Since the lights go off automatically when the ignition is off, how can this happen? Your Mazda has DRL, daytime running lights, that will turn on whenever car is running, and off when you shut car off.
Problem in new cars is that to save every drop of fuel the alternator is usually not charging the battery even during longer trips and it charges battery only when you use engine braking downhill or nearing to crossroad, or when the battery is almost unable to start the car. Click to expand…
Why does my car not start on a low charge?
However, if the battery only has a low charge, the Battery Management System (BMS) switches off the start-stop function to enable the engine to be started. A similar protective mechanism operates in the following cases: The wrong battery technology has been installed, which can only provide a small number of charging cycles.
What to do if your Mazda 6 won’t start?
2009 Mazda 6 won’t start. Green key light comes on (registers the key is present). Everything lights up and the battery is fine. Starter won’t engage. … read more
Why does battery management switch off the start-stop system?
The battery management switches off the start-stop function The top priority for any battery is to start the engine. However, if the battery only has a low charge, the Battery Management System (BMS) switches off the start-stop function to enable the engine to be started. A similar protective mechanism operates in the following cases:
What should I do if my Mazda 3 GT wont start?
1.) Charged the car battery 3.) Only way to start the car is to hold the key fob close to the start button, put your foot on the brake pedal, then keep holding the start push button 4.) Car will then start and the start push button turns the color green. 5.)
How to reset the Mazda i-stop off switch?
Turn everything electrical off that you can – radio, A/C etc so there is no/minimal electrical load. Switch the ignition off. Switch ignition to on but dont start engine. Long-press the i-stop OFF switch for 3 s within 5 s after switching the ignition ON. Start the engine. Press the i-stop OFF switch.