How to change the ride height on a Mercedes SL600?

How to change the ride height on a Mercedes SL600?

You can change the ride height and the height the car goes to when you press the switch next to your headlights. As you know the switch gives you 2 different heights besides the stock height. The 1st height with 1 light you can drive on up to 30mph the second is 15 IIRC.

How does Mercedes lowers the drops when parked?

Mercedes lowers drops on rear or front. When the car is parked the airmatic will try to level the car. It does this by discharging air from the airmatic suspension strut that is too high. Typically the car is leveled by lowering the one or two corners of the car that are too high.

What causes a Mercedes Benz to self level too high?

This may cause your Mercedes-Benz to self-level too high or too low. Mercedes-Benz E, C, CLK, GL, S-Class may develop any of the following issues. Hissss… air released by the air compressor release valve. You hear air compressor engaging when parked.

What are the most common Mercedes Benz air suspension problems?

Summary of the most common problems with Mercedes-Benz air suspension systems, DIY solutions are provided in the next section: Air suspension compressor Failed (Easy DIY repair, Average cost $200) The air suspension compressor does just that, generates compressed air. It fills up all the air struts, and it can fail.

What happens when Mercedes Benz air suspension stops working?

When they stop working the air suspension control unit may no longer be able to recognize the height of the car. Your Mercedes-Benz will greet you with a warning message on the dash related to the airmatic failure. The car height may be correct and the car still rides fine, it’s just that the computer doesn’t know that.

What to do if there is no power to the air suspension pump?

If there is no power going to the air suspension compressor, check the air suspension fuse and relay. Here is a picture that shows no power to the air suspension pump. The next step would be to use a professional diagnostic scanner such as the iCarsoft MB II to check the fault codes for the Air Suspension Control Unit.

What happens when the air suspension compressor quits working?

Typically when the air suspension compressor quits working, the whole car may lower to the ground and fail to raise. You press the button to raise the car, and nothing happenes. If the air suspension compressor works as designed, you will hear the compressor engage and run for several seconds.

You can change the ride height and the height the car goes to when you press the switch next to your headlights. As you know the switch gives you 2 different heights besides the stock height. The 1st height with 1 light you can drive on up to 30mph the second is 15 IIRC.

What to do if your Mercedes SL Class R129 is running rough?

Check your charging system. If your engine is running rough and misfiring you may need to change your cap, rotors and wires. If your valve cover gaskets are leaking we will show you how to replace them. Engine running lean/rough. Maybe you have a vacuum leak. If you engine is only running on one bank of cylinders you may have a bad coil.

What makes a Mercedes sl129 make a clicking noise?

Check that lower control arm bushing. Uneven tire wear and unusual handling in turns can be caused by worn suspension links. Check your rear rearward upper link. A light clicking noise from your rear suspension over bumps can be the result of worn sway bar links.

When they stop working the air suspension control unit may no longer be able to recognize the height of the car. Your Mercedes-Benz will greet you with a warning message on the dash related to the airmatic failure. The car height may be correct and the car still rides fine, it’s just that the computer doesn’t know that.

Posted In Q&A