How to change the oil in a Harley-Davidson Heritage Softail?
Allow your Heritage Softail’s oil to drain for a minimum of five minutes or until the flow of oil slows to a thin trickle. Clean the drain plug with a shop towel and replace its sealing O-ring with a new O-ring.
Can you replace the oil pump on a Harley Davidson Softail?
Replacing your oil pump is a relatively easy job that you can do yourself to resolve your pesky oil leak problem. This article applies to the Harley Davidson Softail. Have you noticed a leak around your oil pump? Don’t despair, replacing the oil pump on your Softail isn’t as daunting a task as it might appear.
Where can I buy a 1989 Harley Davidson?
And check out the bike’s reliability, repair costs, etc. Show any 1989 Harley-Davidson FLSTC 1340 Heritage Softail Classic for sale on our Bikez.biz Motorcycle Classifieds. You can also sign up for e-mail notification when such bikes are advertised in the future. And advertise your old MC for sale.
How much does an oil change on a Harley Davidson cost?
Harley Davidson oil changes can be pricey. Dealerships typically quote $225 for this service. If you’re someone that isn’t afraid to get their hands dirty, read this article and learn how to save some money.
How do you change oil in a Harley Davidson Softail?
Get your pan into position under the drain plug. Remove the oil fill cap. Remove the drain plug and let the oil drain into the pan. Figure 1. Remove this drain bolt and let all the oil drain from the bike.
What kind of oil does a 1999 Softail use?
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.
Where is the oil plug on a Softail?
Locate the drain plug by following the oil line from the right side of the oil tank to the frame. The oil line is plugged by the drain plug on the underside of the frame between rear shocks. Place an oil drain pan directly beneath the drain plug and remove it with a socket wrench.
How to change the oil in a Harley Davidson primary chaincase?
Remove the drain bolt O-ring and wipe the bolt threads and tip with a shop rag. Slip a new O-ring onto the bolt, then coat the O-ring with Harley-Davidson Formula+ Primary Chaincase Fluid. Screw the drain bolt into the primary chaincase by hand.