How to change the oil filter on a Honda Accord?
Get the replacement filter and lightly spread clean engine oil onto the rubber gasket of the new filter. Thread the new filter into the oil filter port by turning the filter clockwise. Once the rubber gasket contacts the engine block, use the channel locks to turn the filter one full turn CW.
How can I change the transmission fluid in my Honda Accord?
Install the new transmission filter and tighten it using the holder and bolt supplied. Reconnect the cooler hoses to the filter and secure them with the clamps provided. Reinstall the splash shield. Refill the transmission with Honda premium automatic transmission fluid or an equivalent fluid per your vehicle’s manufacture’s specifications.
When to replace the oil pressure switch on a Honda Accord?
In most cases you replace this switch because it’s leaking oil. Not the case on this Accord. I also show how to attach an oil pressure gauge to physically measure engine oil pressure. The oil pressure sender socket in the video is part number KD2569. An equivalent socket can be picked up at most auto parts stores if needed.
How do you replace an oil filter on a car?
Use a clean rag or towel to wipe down the oil filter threads and contact area on the engine. Use your hand to screw the new filter back into place over the oil filter threads. Hand-tighten it until it is snug. Remove the oil drain pan and any other tools from underneath the car.
How to change the oil in a Honda Accord EX?
Oil & Filter Change Honda Accord (1998-2002) – 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5.
How to do an oil and filter change?
Oil & Filter Change Honda Accord (1998-2002) – 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open
How do you fix a leaking oil filter?
Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11. Leak Inspection – Start vehicle and visually inspect for leaks