How to add coolant to a Jeep Grand Cherokee?

See how to add engine coolant (antifreeze) to a 2011 Jeep Grand Cherokee Laredo 3.6L V6. This free video also shows you how to mix the coolant with water on a 2011 Jeep Grand Cherokee Laredo 3.6L V6 About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Jeep Grand Cherokee 2011

When to add engine coolant to your car?

Best to add engine coolant when the engine is cold. Once you’ve checked the engine coolant level, and it’s under minimum, you’ll have to add some. Before adding engine coolant, be sure you have the proper one. Car manufacturers have their own recommendations regarding this matter.

Where to put the coolant in the radiator?

There’s a COLD/MIN label on the tank indicating the ideal antifreeze level when the engine is cold. The coolant in the radiator should be just below the filler neck.

Why is coolant coming out of the reservoir?

The first thought that comes to mind is that the coolant is getting pushed out the reservoir overflow tube when the engine warms up because of a bad radiator cap. A pressure test won’t show this, because one has to remove the radiator cap to do the test!

Why is the coolant not coming out of my Jeep?

I have never noticed a leak, or anything damp on the Jeep. No coolant in the oil, or no leaking through the exhaust. Any ideas on what is happening to the coolant? The only thing I can figure is it is seaping out the waterpump and drying on the warm engine. I can’t really smell anything though. Any help appreciated.

What should I do if my car is losing coolant?

Engine overheating and coolant are closely related to each other. Loss of the liquid can lead to the overheated condition but overheating can also contribute to the coolant loss. Just fill up the tank to the maximum limit and keep an eye on the engine condition and the rate of coolant usage.

What kind of antifreeze does a 2011 Jeep GC use?

Please keep in mind, depending on the year of your model GC, it will use a different antifreeze. 2011 – 2012 uses i believe he orange liquid, while 2013 and above uses the purple. Click to expand… Good info!

What kind of coolant does a jeep Zerex use?

Except Zerex G-05 is dyed the Ford Amber instead of the Chrysler Orange-Red or Pink…. …there is really no reason to spend extra for the OEM HOAT, in fact Chrysler dye’s there replacement anti-freeze a different color than the factory fill, so there is no reason to do it for the color….. Chrysler OAT is being kept secret.

Do you have to add coolant to antifreeze?

ANother option if you feel you must add “coolant” but don’t want to ruin the existing stuff is you can just put plain water in. Adding a pint or quart of water to the two gallons of coolant already in it won’t change the boiling/freezing point enough to worry about unless you are planning to operate on the extreme edges.

What kind of air filter does a Jeep Grand Cherokee use?

2011 Jeep Grand Cherokee Laredo 3.6L V6 Replace your air filter! Replacing a dirty air filter can improve gas mileage by up to 4%. Isn’t efficiency great?

How does coolant work in a Jeep Grand Cherokee?

Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Grand Cherokee is located and how to add coolant.

What kind of coolant should I put in my Jeep Overland?

I own a 2013 Jeep Grand Cherokee Overland (AWD V6) and the reservoir is low on coolant/antifreeze. I was going to just add some Prestone, but read that doing so isn’t a good idea. That I should add Mopar coolant that applies to my specific vehicle. Well, I can’t figure out which type or part # the coolant is.

How to add coolant to a Jeep Liberty?

Be sure to check your owners manual to determine the correct type of fluid to add – for Jeeps, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.

Navigation