How often does a Mitsubishi Lancer battery drain?
Please try again later. We recently observed a consistent pattern of battery drain on a 2009 Mitsubishi Lancer “ES” it started draining a fully charged battery every 3-4 days. We had NO idea what the cause was. We connected an ammeter to the negative side of the battery in hopes of isolating the drain.
How to find the cause of parasitic battery drain?
Luckily, you can usually find the cause of a parasitic draw yourself. Start by connecting a digital multimeter to the negative battery terminal of your vehicle. Then, remove the fuses one at a time while watching for changes in the multimeter’s reading.
How to find out if your car battery is parasitic?
How to Find a Parasitic Battery Drain. When your car battery goes dead overnight, usually either the battery is at the end of its life span, or you left something on, such as a light.
How to get rid of negative battery drain?
Remove the negative battery cable from the negative battery terminal. Find the negative cable, which will be marked with a minus sign (-) and may have a black cover over it. Remove the cover, if applicable, and use a wrench to unbolt the negative cable from the terminal.
Please try again later. We recently observed a consistent pattern of battery drain on a 2009 Mitsubishi Lancer “ES” it started draining a fully charged battery every 3-4 days. We had NO idea what the cause was. We connected an ammeter to the negative side of the battery in hopes of isolating the drain.
Luckily, you can usually find the cause of a parasitic draw yourself. Start by connecting a digital multimeter to the negative battery terminal of your vehicle. Then, remove the fuses one at a time while watching for changes in the multimeter’s reading.
How to Find a Parasitic Battery Drain. When your car battery goes dead overnight, usually either the battery is at the end of its life span, or you left something on, such as a light.
Remove the negative battery cable from the negative battery terminal. Find the negative cable, which will be marked with a minus sign (-) and may have a black cover over it. Remove the cover, if applicable, and use a wrench to unbolt the negative cable from the terminal.
When did the Mitsubishi Lancer go out of production?
Between its introduction in 1973 and 2008, over six million units were sold. According to Mitsubishi, there were nine generations of development before the current model. Mitsubishi ended production of the Lancer in August 2017 worldwide, with the exception of Taiwan and Mainland China.
When did the Mitsubishi Lancer Celeste stop being made?
The Celeste was facelifted in 1978, receiving square headlights and bigger squarer bumpers. Production of the Lancer Celeste ended in July 1981 and it was replaced by the front-wheel drive Cordia in early 1982. In 1979, the all new Lancer EX was unveiled in Japan.
Can a fully charged Lancer battery not start?
For example, you can have a fully charged 550A battery that reads 11.5V and be fine, and you can have the same battery discharged to 240A and still read 12.5V and not be able to start the car. Can you provide your VIN so I can check to see if it was produced in that batch of bad ETACS that had power draws?
What kind of car is the Mitsubishi Lancer Evolution?
Like the Lancer sedan on which it’s based, the 2008 Mitsubishi Lancer Evolution was thoroughly redesigned for 2008. The Lancer’s new look helps to separate this five-passenger sedan from a well-populated pack, due in no small measure to the car’s large grille and aggressive stance.
What’s the price of a 2008 Mitsubishi Lancer?
Buyers are currently paying close to the Manufacturer’s Suggested Retail Price (MSRP) for the 2008 Evolution, but that could change, so it’s a good idea to check the Fair Purchase Prices prior to negotiating with a dealer.
For example, you can have a fully charged 550A battery that reads 11.5V and be fine, and you can have the same battery discharged to 240A and still read 12.5V and not be able to start the car. Can you provide your VIN so I can check to see if it was produced in that batch of bad ETACS that had power draws?
Where is the 30A fuse on a Lancer?
It is a 30A fuse, located near the forward driver side corner of the fuse panel. With those fuses removed see if the battery gos flat tonight or not. I suspect it will not, and if so then you can at least isolate the circuit affected.
What happens if the Mitsubishi Lancer battery fails?
It also provides power to accessories, computers and at times, regulates voltage. Without a battery, your car won’t start and this applies when it fails, there are a few signs your Mitsubishi Lancer battery is about to fail and you need to replace it before you get stuck or stranded:
How to stop the battery draining on a Lancer?
Open the hood and go to the fuse panel. You’ll see a fuse with a handle on it, pull it up disengaging the fuse. This will kill power to the key off electronics (domes, radio memory, keyless entry). You will need to lock the doors by hand after doing this.
It is a 30A fuse, located near the forward driver side corner of the fuse panel. With those fuses removed see if the battery gos flat tonight or not. I suspect it will not, and if so then you can at least isolate the circuit affected.
Why does my Buick Enclave battery drain while driving?
If the battery is draining while you’re driving, that is probably going to be the alternator or battery. There are other situations as well. We’ll cover those for you below.
If the battery is draining while you’re driving, that is probably going to be the alternator or battery. There are other situations as well. We’ll cover those for you below.