How much transmission fluid do I need for my Jeep Wrangler?
Before beginning work, purchase the 4 quarts of the specified transmission fluid and a new filter. Other tools necessary for this job include jackstands to support the vehicle in a raised position, a drain pan capable of holding at least eight pints, newspapers and clean rags.
What kind of transmission does a YJ Wrangler have?
The 2.5 liter straight 4 w/manual transmission was always paired with the AX-5. The TF 904 automatic transmission option was only made available from 94-95. Both straight 6 motors were matched with the TF 999 for the entire production run.
How much oil is in a Jeep Wrangler?
Jeep Wrangler Fluid Capacities. Tweet. Engine Oil (w/ Filter) 2.4L 4 quarts 10W-30. 2.5L 4 quarts 10W-30. 3.8L 6 quarts 5W-20. 3.7L 5 quarts 5W-20.
What kind of transmission did the Wrangler have in 1987?
The manual transmission from 1987-1990 was the BA-10/5, and from 1991 onwards the AX-15 was used.
Before beginning work, purchase the 4 quarts of the specified transmission fluid and a new filter. Other tools necessary for this job include jackstands to support the vehicle in a raised position, a drain pan capable of holding at least eight pints, newspapers and clean rags.
The 2.5 liter straight 4 w/manual transmission was always paired with the AX-5. The TF 904 automatic transmission option was only made available from 94-95. Both straight 6 motors were matched with the TF 999 for the entire production run.
How to change the transmission on a Jeep Wrangler?
Make sure the gasket surface on the transmission pan is clean and dry, then install a new pan gasket. Put the pan in place against the transmission and, working around the pan, finger tighten each bolt, then tighten a little at a time until the final torque figure is reached to avoid warping the pan.
Where is automatic transmission fluid filter on Jeep Wrangler?
Earlier models are held on with three bolts, while later models simply press into an o-ring. The automatic transmission fluid filter on earlier 3 and 4-speed models is held in place by three screws. On later 5-speed NAG1 models the filter pulls straight out of the valve body.
What should the fluid capacity be on a JK Wrangler?
If you like to do your own service on your JK Wrangler you will need to know the specifications for fluid changes. This information is in the owners manual and service manual but has also been compiled here for quick reference. *75w-140 recommended in rear differentials for warm weather towing applications.
What kind of transmission does a Jeep Wrangler have?
Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission.
Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission.
If you like to do your own service on your JK Wrangler you will need to know the specifications for fluid changes. This information is in the owners manual and service manual but has also been compiled here for quick reference. *75w-140 recommended in rear differentials for warm weather towing applications.
How often to check transmission fluid in Jeep Wrangler?
If you take your Jeep in regularly to have the oil changed, you can also have the service technician check the transmission fluid levels for you. Check the fluid in your Jeep Wrangler manual transmission every 3,000 miles.
How much oil does a Jeep Wrangler take?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type 3.8L Engine Oil 6 Quarts / 5.7 Liters 5w-20 3.6L Engine Oil 6 Quarts / 5.6 Liters 5w-20 Brake Fluid Fill to Full Mark DOT 3 Clutch Fluid Fill to Full Mark DOT 3