How much transmission fluid do I need for a 2008 Jeep Liberty?
The 2008 Jeep Liberty has a transmission fluid capacity of up to 8.8 quarts. It uses dexron VI fluid for its engine.
How many quarts of transmission fluid does a Jeep Liberty take?
Fluid Capacities and Type
| Capacity (Quarts) | Capacity (Liters) | |
|---|---|---|
| (5)45RFE Transmission (Service) | 5.00 QUARTS | 4.73 LITERS |
| 42RLE Transmission (Dry Fill) | 8.80 QUARTS | 8.30 LITERS |
| 42RLE Transmission (Service) | 4.00 QUARTS | 3.80 LITERS |
| NSG370 Manual Transmission | 1.585 QUARTS | 1.50 LITERS |
How do you check transmission fluid in a jeep?
There’s about a 30″ cord that it comes with. This person somehow taped it to his 36″ zip tie (marked) and/or dipstick then pushed it into dipstick hole and was able to get an accurate temperature AND level at the same time.
How do you check the CVT transmission fluid?
Warm up the transmission, wait at least 2 minutes and check the oil level with the engine running. Push the Oil Dipstick 9336 into transmission fill tube until the dipstick tip contacts the oil pan and pull out again, read off oil level, repeat if necessary.
How do you check the oil level in a transmission?
Push the Oil Dipstick 9336 into transmission fill tube until the dipstick tip contacts the oil pan and pull out again, read off oil level, repeat if necessary. NOTE: The dipstick will protrude from the fill tube when installed. 6. Check transmission oil temperature using the appropriate scan tool 7.
Where is the transmission dipstick on a Jeep Liberty?
Locate the dipstick for the transmission fluid in the engine compartment. It’s near the firewall, close to the back of the engine. On most Jeep vehicles, the transmission dipstick is labeled and has a yellow or red “T” handle.