How much is the oil pressure switch on a Honda P3400?

How much is the oil pressure switch on a Honda P3400?

This is a little basic video i made on p3400. There is a troubleshooting guide in the honda service manual, but an oem rocker arm oil pressure switch and oring is only about $27. Takes a couple minutes and is worth a try.

What to do if your Honda Pilot says P3400?

Replace the pressure switch. If it still gives the code, pop the cove off and look. There’s no way for mere mortals (those of use without ready access to HDS…) to run a function diagnostic on the system.

What does P3400 stand for on Honda Odyssey?

P3400 relates to bank 1, which is the rear cylinder head VCM solenoid. As a test, I unplugged the oil pressure sensor, and the Odyssey now ran in 6 cylinder mode ALL the time.

What does the PCM do on a Honda P3400?

The PCM monitors oil pressure in the hydraulic circuit of the VTEC mechanism using the front of rear rocker arm oil pressure switches downstream of the rocker arm oil control solenoids. Need more information on how to fix the P3400 HONDA code?

This is a little basic video i made on p3400. There is a troubleshooting guide in the honda service manual, but an oem rocker arm oil pressure switch and oring is only about $27. Takes a couple minutes and is worth a try.

What is Bank 1 code for P3400 cylinder?

I have a p3400 cylinder deactivation system bank 1 code that… I have a p3400 cylinder… I have a p3400 cylinder deactivation system bank 1 code that when I clear comes right back without starting car. these oil pressure switches are a high failure rate and will get stuck or not operate at all for the vteck system

Replace the pressure switch. If it still gives the code, pop the cove off and look. There’s no way for mere mortals (those of use without ready access to HDS…) to run a function diagnostic on the system.

Can a P3400 code be a false positive?

Sometimes the P3400 can be a “false positive” in the sense that it is indicating the sensor is bad (or oil pressure is actually low) when in actuality, the computer is not managing the VCM properly. Also what ends up happening is excessive oil consumption at lower speeds (~40 MPH).

Posted In Q&A