How much is a thermostat for a 1999 Honda Accord?
The average cost for a Honda Accord thermostat replacement is between $163 and $187. Labor costs are estimated between $90 and $114 while parts are priced at $73.
How big are the bolts on a Honda Accord thermostat?
The two 10mm bolts holding the thermostat housing in place might be a tight fit for your wrench. Figure 3. The three bolts are indicted by the red circles. It isn’t necessary to remove the lower radiator hose connected to the thermostat housing.
What happens if the thermostat on a Honda Accord goes bad?
This article applies to the Honda Accord (1990-2002). An important part of a car’s cooling system is the thermostat. If your thermostat is bad, then you are probably experiencing overheating issues, which are dangerous because they can lead to an engine damage.
What should I do if my Honda Accord is hot?
If your car is hot, do not remove your radiator cap. You are in danger of burning yourself, so wait for the car to cool down. On the front and back of the air intake box there are 10mm screws. Remove both of these screws. You will probably need the extension for the socket wrench.
How many gallons of coolant should I take out of my Honda Accord?
Around two gallons should drain out. If your coolant flow seems slow, remove the radiator cap and coolant reservoir cap to speed up the process. Also, consider gently squeezing any radiator hoses that you can reach to coax any residual stuck coolant out.
What is the thermostat on a Honda Accord?
Thermostats are an important part of your car’s cooling system. This guide will go over how to successfully replace a thermostat on your Honda Accord before you blow the engine. This article applies to the Honda Accord (1990-2002). An important part of a car’s cooling system is the thermostat.
If your car is hot, do not remove your radiator cap. You are in danger of burning yourself, so wait for the car to cool down. On the front and back of the air intake box there are 10mm screws. Remove both of these screws. You will probably need the extension for the socket wrench.
Around two gallons should drain out. If your coolant flow seems slow, remove the radiator cap and coolant reservoir cap to speed up the process. Also, consider gently squeezing any radiator hoses that you can reach to coax any residual stuck coolant out.