How much horsepower does a 4AGE have?
SPEC SHEET
| ENGINE | |
|---|---|
| Bore & Stroke (mm): | 81mm x 77mm |
| Peak Horsepower (@ RPM): | 112 hp @ 6,600 RPM, 157 hp @ 7,400 RPM (20V), 167 hp @ 7,400 RPM (4A-GZE) |
| Peak Torque (@ RPM): | 97 lb-ft @ 4,800 RPM, 119 lb-ft @ 5,600 RPM (20V), 155 lb-ft @ 5,600 RPM (4A-GZE) |
| Pistons/Compression Ratio: | 9.4:1, 10.3:1, 10.5:1 (20V) |
What car has the 4AGE engine?
The 4A-GE engine was first introduced in the 1983 Sprinter Trueno AE86 and the Corolla Levin AE86.
Why is the 4AGE so good?
The upshifts are smooth and precise, delivering instant power from the naturally aspirated blacktop 4AGE engine. It’s a solid piece of Japanese engineering at its best, squeezing out incredible amounts of fun-power (horsepower should not be the unit of measurement for such engines) from a tiny 1.6 liter engine.
What is the difference between 7AFE and 4AFE?
7afe has a knock sensor, 4afe does not.
What is a black top engine?
A Blacktop engine is an interference engine unlike all other A series engines. Although the pistons are initially interchangeable physically they aren’t practically as a Silvertop with Blacktop pistons has a very high compression and quite low when the combination is reversed.
How much HP does Takumi’s ae86 have?
Horsepower: 240PS at around 11,000 rpm.
How much HP does Takumi’s AE86 have?
Is the 4AGE a good motor?
The 4AGE is a great engine. You’ll still get at least 30 mpg, which definitely isn’t bad, but the engine alone is not so finicky as to be unable to be driven on the road… remember, in Japan these engines came in a lot of daily driver cars.
Is 4afe twin cam?
“G” heads often have Yamaha’s sticky fingers in the pot. 2/24/14 5:13 p.m. The “F” is a Single Cam Gear turning two camshafts. The “G” is a single cam gear for each cam.
What is a 7AGE engine?
A 7AGE is a hybrid motor that uses a 7AFE block, crank and sometimes other bottom end components and a 4AGE head and other components to make a 1.8 liter stroker motor. You can do this with any 4AGE head including largeport, smallport, silvertop or blacktop.
How much horsepower does a Toyota 4ac have?
Toyota 4AC Engine Basic 4A is an inline-4 8-valve motor featuring carburetor and a single overhead camshaft. It reaches output of 78-90 hp (58-67 kW or 79-91 PS) at 4,800 rpm with torque of 115 Nm (85 ft/lb) at 2,800 rpm. The exact data depends on the region of motor’s selling.
How big is the cylinder bore on a Toyota 4A?
The 4A was produced from 1980 through 2002. All 4A engines have a displacement of 1,587 cc (1.6 L). The cylinder bore was enlarged from the previous 3A engines at 81 mm (3.19 in), but the stroke remained the same as the 3A at 77 mm (3.03 in), giving it an over-square bore/stroke ratio which favours high engine speeds.
How many horsepower does a Toyota 4A Fe have?
8. 4A-FHE (1990 – 1995) is an improved 4A-FE model possessing the different camshafts and modified inlet. The compression ratio is 9.5, the capacity of the engine is 110 horsepower at 6,000 rpm, and torque is 142 Nm (105 lb•ft) at 3,600 rpm. The 4AFHE was originally installed in Toyota Carina and Toyota Sprinter Carib, as well.
What kind of Turbo does a Toyota 4A have?
10.1 4A-GZE Gen 1 (1986 – 1990) is a 4A-GE supercharged type. The SC12 supercharger is used. The maximal boost pressure is 9 psi (0.6 bar). Forged pistons are applied to that engine (compression ratio – 8).