How much fluid does a Jeep Wrangler need?
Lower the vehicle and add the specified amount of automatic transmission fluid through the filler/dipstick tube. Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.
Where can I get automatic transmission fluid for my Jeep Wrangler?
If you prefer to shop in person for the right Automatic Transmission Fluid products for your Wrangler, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time! Use the fitment form at the top of the page to select your exact year and engine type for your Jeep Wrangler.
What kind of engine oil does a Jeep Wrangler use?
Sizes of Wiper Blades Battery Fluids Engine Oil Transmission Fluid Antifreeze & Coolant Wheels Tire and Rim Sizes Bolt Patterns Filters Air Filter Cabin Filter Fuel Filter Oil Filter Brakes Brake Discs Brake Drums Brake Pads Brake Fluid Fans
When to use ATF + 4 in Jeep Wrangler?
ATF+4 was developed to succeed ATF+3 applications and degrade much slower. Where a transmission with ATF+3 might experience some shudder at around the 30k mile mark, the same trans with ATF+4 shouldn’t experience shudder until 80-100k miles (depending on driving conditions). In short, ATF+4 is a complete replacement for ATF+3.
Lower the vehicle and add the specified amount of automatic transmission fluid through the filler/dipstick tube. Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.
When to change transmission fluid in Jeep Wrangler?
At the specified time intervals, Haynes reccomends 30,000 miles or 2 years, the transmission fluid should be drained and replaced. Since the fluid will remain hot for hours after driving, perform this procedure only after the engine has cooled down completely.
Sizes of Wiper Blades Battery Fluids Engine Oil Transmission Fluid Antifreeze & Coolant Wheels Tire and Rim Sizes Bolt Patterns Filters Air Filter Cabin Filter Fuel Filter Oil Filter Brakes Brake Discs Brake Drums Brake Pads Brake Fluid Fans
What kind of coolant does a Jeep Wrangler TJ use?
The Jeep Wrangler TJ came with a HOAT coolant from the factory. I always recommend running OE Mopar coolant or Zerex G-05, which are both HOAT coolants. Remove dipstick and insert clean funnel in transmission fill tube. If only fluid and filter were changed, add 3 pints (1-1/2 quarts) of ATF+4to transmission.