How much energy is needed to power a train?
In most trains, the power ranges anywhere between 5000 to 7000 horsepower. Hartill, Lane. Hop aboard a 130-ton ‘hog’.
How many kw does a train use?
The Class 222 trains have one 580 kW engine in each car. In the thirty seconds, it would take to cover a mile, a Class 222 train would use 580/120 or 4.83 kWh per vehicle mile.
How much current does a train draw?
How much current runs through railway overhead lines? – Quora. This depends on the voltage. On a high speed line at 25 kV/50 Hz, running at maximum speed, a TGV-2N type train draws around 500 A. In a city, on a streetcar line, electrified at 750 V=, a 7-element Alstom Citadis draws up to 1200 A.
How expensive is it to run a train?
By way of comparison, an electric train which consumes 30 kWh per train-mile at 12¢ per kWh would have a fuel cost of only $3.60 per train-mile and many trains average less. With the proviso about equipment maintenance kept in mind, the total marginal cost of running a Metrolink train is $33.05 per mile.
How much fuel does a train burn?
Similarly, a typical train might haul 3,000 tons of freight 500 miles and consume approximately 3,049 gallons of diesel fuel. The efficiency of this freight haul would be calculated as: (3000 tons x 500 miles) / (3,049 gallons) = 492 ton-miles per gallon.
How much does a train cost per mile?
rule of thumb for new track construction is between $1 Million – $2 Million per mile, depending on who is constructing the track. Some rail clients need alot of track space to handle unit trains over a mile long.
How much power does an electric train have?
One example is the WDM-3F, delivering 3600 horsepower, which is around 2685 kW of peak power. This will be the approximate power drawn by the locomotive at full load, usually while starting from stand still. Once the train reaches its coasting speed, the power to keep it moving at that speed will be a lot lesser.
What makes a high speed train run on electricity?
Most high-speed traction is powered by electricity, taking advantage of the superior power-to-weight ratio and ease of maintenance of electric motors when compared with diesel traction. Electric rolling stock also tend to last a a lot longer than diesels.
How many kWh does a subway train use?
An average train is about 305 tons, so it is 15.86 kW*h/km. and so on… See “power outut” in the information box. Hmm, interesting. So using these numbers, a typical train of ~10 cars (as on the NYC subway) would use only about 35 kWh to get the one mile from, say, Union Square to Penn Station? That seems very low to me.
How does train energy, power and traffic control work?
REES Module #3 – Train Energy, Power and Traffic Control7 SPEED (mph) ton) Speed and Resistance by Transport Mode Rail uniquely combines High Speedand Low Resistance Airplanes Trucks Boat © 2010 J. Riley Edwards and Chris Barkan. All Rights Reserved. REES Module #3 – Train Energy, Power and Traffic Control8