How much does it cost to replace brakes on Mercedes?
Brake pads for a Mercedes-Benz can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad desired. Mercedes-Benz Brake rotor replacement can cost anywhere between $300 – $750 for all four rotors to be replaced. This price estimate includes labor and components.
How do you change the brake pads on a Mercedes?
Rember to apply anti-squeal grease to the brake pads’ back and at the area where the brake pads slide on the bracket. Apply grease to the guide pins. Slide the caliper on the bracket. Tighten the guide pins to specification. The typical torque range is between 30 and 55 Nm and varies between models.
How do you replace the caliper on a Mercedes Benz?
Pull the caliper off the caliper bracket, and support it with a hook or wire to avoid hanging it from only the brake line. Then, use a small drill bit to remove two stabilizer pins on the caliper bracket. Insert a flat head screwdriver between the brake pads and the caliper bracket.
How to remove and install front brake pads and rotors?
Clean the contact surface of the brake pads in the caliper. You can use a metal brush cleaner. Reinstall in reverse order. Install caliper guide bolts and tighten to 30 Nm using a torque wrench. Close brake reservoir cap. NOTE: Once you install the pads and/or rotors, start the car but do not drive yet.
What kind of brake system does a Mercedes Benz have?
Check the brake fluid and take your Mercedes-Benz for a test drive. If your Mercedes-Benz has an SBC brake system (common on early E-Class W211 and CLS models), it should be disabled before you work on the brake system.
How much does it cost to change brake pads on a Mercedes?
The typical cost to change Mercedes-Benz rear brake pads yourself averages $100. The average cost to change the brake pads at an auto mechanic or dealer range between $250 and $500. If you plan to replace the rotors, the cost would be two to three times more than just changing the brake pads.
How do you replace brake rotors on a Mercedes Benz?
To install the new rotors, apply a small amount of Loctite Threadlocker Blue to the threads of the Torx screw. Place the rotor on the wheel up, and secure it with the T40 Torx screw.
What kind of brakes does a Mercedes Benz use?
In addition to the obvious safety reasons, maintaining your brakes will help with resale value. At a basic level, cars like your Mercedes-Benz use what are called “friction” brakes. These brakes use the contact between two types of material to bring the car to a halt. A friction brake may be either a disc brake or a drum brake.
Can you replace the brakes on a Mercedes W211?
Luckily, replacing the brakes on a w211 is as easy as replacing them on just about any other vehicle. The only unique task here is disconnecting the Sensotronic Brake Control (SBC) system before starting the job.