How much does it cost to replace a shift cable?
A factory part costs about $185, and an ATP cable costs about $48. The total cost to complete the shift cable replacement would be about $425 using OE parts, or about $268 using aftermarket parts. The problems that occur with shift cables are about the same whether they are used on automatic or manual transmissions.
How much does it cost to repair a transmission cable?
If the cause turns out to be a loose shifter linkage, you can tighten it yourself at no cost, or have the repair-shop do it for $50-75. If the condition is being caused by a damaged shifter cable, the repair-shop will charge you $125-$250 for replacement, or you can purchase and replace it yourself for around $35-$80.
What do you call a trans shift cable?
Shift cables are known by several names. It may be referred to as an automatic trans shift cable or a shift selector cable. Sometimes people will just refer to it as a shifter cable. Regardless of the term used they all refer to the same components and they perform the same function.
How much does it cost to replace shift cable in Volkswagen Jetta?
For a couple of examples, a 2008 Volkswagen Jetta with a 2.0-liter engine and a manual transmission uses a pair of shift cables between the shift lever and the transmission. A factory cable assembly costs about $123 and the labor time is estimated at 2.7 hours, making the job to replace the shift cables about $393 in total costs.
What does the shifter cable do?
A transmission shift cable (also called a shifter cable or any of the names listed above and even others that we may not have yet heard), is the link between the shifter handle and the transmission in a vehicle . Its position changes as a driver moves the shifter handle the vehicle choosing the gear setting of a vehicle.
What is a shift cable?
The shift cable is a two piece shift cable. The front half (column end) or rear half (transmission end) of the shift cable can be removed without removing the other end/half of the shift cable.
What is gear shift cable?
The shift selector cable connects the gear shifter, located on the steering column or on a floor mounted console, to the automatic transmission. The cable is typically steel and is protected from the elements by a plastic outer sheath. At each end of the shift cable, often rubber or nylon bushings allow for cable movement and vibration.
What is a cable shifter?
The shifter incorporates two cables, one that operates the brake and one that controls the derailleur. The derailleur is the mechanism that moves the chain to a given sprocket. The derailleur cable is also known as a shifter cable. Generally, shifter cables are replaced as part of a yearly tune-up or if the cable is frayed or damaged at any point.
A factory part costs about $185, and an ATP cable costs about $48. The total cost to complete the shift cable replacement would be about $425 using OE parts, or about $268 using aftermarket parts. The problems that occur with shift cables are about the same whether they are used on automatic or manual transmissions.
Where does the shift cable go on an automatic transmission?
The shift cable both pushes and pulls as it operates, so it’s a relatively rigid steel cable in a relatively stiff housing. On an automatic transmission, the shift cable connects from the driver’s shift lever to the shift lever on the transmission.
How to fix the shift cable on a Chevy Silverado?
The easiest way to fix your Chevrolet Silverado shift cable! Kit includes replacement bushing. – YouTube The easiest way to fix your Chevrolet Silverado shift cable! Kit includes replacement bushing.
What do I need to replace shift cable on Alpha One?
We now have an affordable socket tool for removing the shift cable. Order #91-12037 for about $27.40(only required for R, MR, Alpha One or Alpha Gen II drives). Bravo shift cables do not require the special socket.