How many volts does a Harley battery have?
Harley Davidson uses almost the same battery as the other motorcycle. Though they may recommend an individual cell for a Harley Davidson motorcycle, it is using a 12 Volts battery with a 12 Volt system. The complete battery specs for a Harley Davidson battery is 12V, 19 amp per hour and 270 CCA.
Why is my Harley Davidson Ultra Classic not starting?
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
What are the symptoms of a Harley Davidson voltage regulator?
One more obvious Harley voltage regulator symptoms is that the cluster displays erratic or inaccurate readings. You might see the speedometer jumping up and down or various gauge lights flashing on and off. Seeing these symptoms on your bike immediately reveals that there is an issue with the voltage regulator.
What’s the voltage on a Harley Davidson starter?
I check the voltage at the kill switch and get 12.3 from the black and white wire that goes to the kill switch and the start button. But, I only get 9.2 volts from the black and red wire from the start switch to the start relay. All the fuses are good and there are 12 volts to the starter and the solenoid.
What causes a Harley Davidson to not turn over?
If the bike does not turn over, the issue can be battery, starter, starter relay. If turns over, but no start, determine if the issue is electrical or fuel related. Check for spark.
When to notice voltage fluctuation on Harley Davidson?
Discussion in ‘ Electrical ‘ started by One For The Road, Apr 21, 2018 . When for a ride today and noticed my voltage gage would fluctuate. I have never noticed this before.
What happens if you have a bad voltage regulator on a Harley?
If there is anything wrong with the voltage regulator of your precious Harley, you will notice some unusual behaviors from the bike as follows – As I mentioned earlier, a bad regulator cannot control the voltage, which overcharges the battery. When the battery gets overcharged regularly, it causes the gas to escape from it.
What should the voltage be on a Harley Davidson stator?
You are correct on the voltage at the regulator pins. It should be -0- Vdc. If you measure your stator output it is in AC voltage. Should read approx. 20 Vac per 1K rpms. Readings on your stator you posted look good.
Why does my Screaming Eagle Bike not start?
Just picked up a 2008 Screaming Eagle Ultra Classic. The bike will not start, and I do not hear the fuel pump kick in. also there in not power at the 15 amp fuse for the fuel pump. Not sure if that is the problem though as that fuse may get power after a relay closes? fuse is good.