How many quarts of oil go in a 2008 Honda Pilot?
The 2008 Honda Pilot uses SAE 5w-20 viscosity, fully synthetic detergent motor oil in its engine. The vehicle has an oil capacity of 4.5 US quarts.
What kind of oil does a 2008 Honda Pilot take?
The 2008 Honda Pilot came standard across all trim levels with a 3.5L V6 engine that will require synthetic 5W-20 motor oil.
How often should you change the oil in a 2021 Honda Pilot?
7,500 Miles
7,500 Miles Your 2021 Honda Pilot’s first scheduled maintenance service includes an oil change. The service technicians will replace the engine’s old oil with fresh oil to protect the engine from wear.
How do I reset the oil life on my Honda Pilot?
How to Reset the Change Oil Light on a Honda Pilot
- Turn the ignition switch to the On (II) position.
- Press the Select/Reset button, located on the steering wheel, and scroll through the options until the Engine Oil Life Display is displayed.
- Press the Select/Reset button while in the On (II) position.
How to change the oil in a Honda Pilot?
Slide under the driver side of the engine bay and locate the drain bolt on the ATF oil pan. Insert the 3/8″ drive ratchet directly in to the square shaped opening in the drain bolt. Loosen the ATF drain bolt by turning it counterclockwise.
What kind of fluid does a Honda Pilot use?
This automotive maintenance tutorial was specifically written to assist owners of the first generation (2003, 2004, 2005, 2006, 2007 and 2008) Honda Pilot AWD SUV equipped with the VTEC 3.5 liter V6 engine in draining the old automatic transmission fluid and refilling with new ATF fluid.
Where can I find the oil life screen on my Honda Pilot?
You can view them on the engine oil life screen at any time. 2019 Honda Pilot oil change! You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the information display/multi-information display:
How to replace 24mm washer in Honda Pilot?
The correct replacement 24mm washer part number is Honda 90441-PK4-000. Slide under the driver side of the engine bay and locate the drain bolt on the ATF oil pan. Insert the 3/8″ drive ratchet directly in to the square shaped opening in the drain bolt. Loosen the ATF drain bolt by turning it counterclockwise.
How do you change the oil in a Honda Pilot?
Slide the used oil catch basin to just below the old oil filter. Twist off the old oil filter in the counterclockwise direction. If you have trouble loosening the old oil filter, use an oil filter wrench such as the Lisle 63600. Allow the old oil to drain out from the filter receptacle for at least a minute or two.
What kind of oil filter do I need for my Honda Pilot?
A few compatible replacement oil filters with their part numbers are as follows: Mobil 1 M1-110, Bosch 3323, Fram PH7317, Purolator PL14610, Pennzoil HPZ-37, Wix 51356, ACDelco PF2057 , Mann-Filter ML 1008 and Pentius PLB7317.
Where is the drain bolt on a Honda Pilot?
Slide under the front passenger side of the engine bay with the 17mm socket, a 3/8″ drive ratchet and a used oil catch container. The silver metal oil pan is stamped with the label “Engine Oil”. The drain bolt is situated at the rear of the pan with the bolt head facing towards the rear of the vehicle.
What kind of fuel does a Honda Pilot use?
† Towing requires installation of power steering fluid- and automatic transmission fluid-cooler, both available exclusively from your Honda dealer. Premium unleaded fuel is recommended when towing above 3500 lbs. Capacity of 4500 lbs. is for boat trailers and 3500 lbs. for all other trailers.