How many quarts of oil does a Harley Davidson Softail take?

How many quarts of oil does a Harley Davidson Softail take?

three quarts
The Softail calls for three quarts of oil. Start with 2 1/2 quarts. It’s very important not to overfill the reservoir. Next, take the bike for a short ride to bring the engine to operating temperature.

How to change the oil in a Harley Softail?

How to Change the Oil in the Primary Chaincase of a Harley Softail Step 1. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while… Step 2. Place an oil drain pan below the primary chaincase on the left side of the engine. Unscrew the …

How to do an oil change on a Harley Davidson Twin Cam?

Screw the filter on until the gasket makes contact with the oil filter housing, then turn it another 3/4 or a turn. This must always be done by hand. Never use a wrench to tighten an oil filter. Drain the primary chain case. This is the beginning of the final leg of your oil change. Find the drain plug in the bottom side of the chain case.

Where is the oil drain plug on a Softail?

On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing.

How big is a Softail on a Harley Davidson?

The example used here is an 88 cubic feet (2.5 m 3) Softail. Always make sure to consult your service manual to make sure you are referencing the proper fluid capacities for your bike.

How to do an oil change on a Harley Davidson Softail?

Follow along as Bob teaches you how to drain the fluids on your Harley Softail, including the primary, engine oil and the transmission drain plugs. You’ll also learn how to expertly reinstall the oil filter, and which parts must be replaced each time you perform a Harley Davidson oil change and service your motorcycle.

How much does it cost to change oil on a Harley?

A bike lift such as this will set you back less than $200 and it will pay for itself after just a couple of oil changes. Warm up your bike a little, as this will help thin the oil and let it flow faster. Once the bike has been running for a couple of minutes, shut it down and then remove the integrated oil fill cap and dipstick.

What kind of oil does a Harley Davidson use?

Harley recommends their specific oil of course, but any motorcycle-rated oil will work just fine and you can choose between synthetic or regular Dino.

Posted In Q&A