How long does it take to replace rear shock in Miata?
Time Required Rear shock, first time, no clue: about 4 hours. Rear shock, second and subsequent time: about 1-1.5 hours for both. Front shock, after benefit of replacing rear shocks: about 1.5-2.0 hours for both.
Can a spring be replaced on a Miata?
Shock/spring replacement can be a difficult and tedious task, particularly if the Madza-recommended (i.e., shop manual) method is used. However, a number of posts to the Miata.net have indicated that this operation can be performed without changing the alignment or breaking ball joints.
Where is the sway bar on a Miata?
Disconnect the sway bar’s attachment to the lower A-arm linkage (14 mm socket), to allow the A-arm to swing out of the way in subsequent steps. The sway bar can be removed either where it joins the A-arm, or at the point between the main (horizontal) sway bar and the curved link that fastens to the arm.
What do you use to replace Shock mount?
Lubricate the lower shock mounting bolt with molybdenum or similar grease, and replace the bolt. Push down on the shaft of the shock, and replace the top shock mount.
What kind of suspension does a Mazda Miata have?
Getting your Mazda Miata suspension dialed in can equate to you out-handling your competition, and depending on your type of racing, will even give you better times. If your vehicle came from the factory with softer suspension, it will almost always handle poorly until the suspension is replaced with a performance setup such as coilovers.
Which is better shocks or factory Miata struts?
Upgrading your struts produces a much smoother ride because the inner valving of Miata struts from AutoZone are of higher quality than factory struts, and have more durable components. Imperfections in the road are barely noticeable because the struts do such a good job absorbing their impact.
Time Required Rear shock, first time, no clue: about 4 hours. Rear shock, second and subsequent time: about 1-1.5 hours for both. Front shock, after benefit of replacing rear shocks: about 1.5-2.0 hours for both.
What’s the best shocks for a Mazda MX-5?
Follow your bliss and upgrade your Mazda MX-5 Miata shocks before they begin to wear out. Upgrading your struts produces a much smoother ride because the inner valving of Miata struts from AutoZone are of higher quality than factory struts, and have more durable components.