How long does it take for a timing belt to break?
It is an intricate, labor-intensive process that can take 4–8 hours, depending on the vehicle. But replacing the timing belt before it breaks will prevent engine damage and save you money in the long run. If you’re unsure about your belt needs to be replaced, stop by Virginia Tire & Auto today.
What happens when your timing belt goes off?
In a worst-case scenario, your timing belt may ‘jump’. This means that the belt jumps a tooth on one of the pulleys it runs around. The timing will be off and the components inside the engine will not be in the right position at the right time. Over time the timing belt can and will wear.
How often do you need to change timing belt?
Available for a few dollars at any auto parts store, you’ll likely need to change yours every 90,000 to 120,000 miles (140,000 to 190,000 km), depending on your engine. Gather the information about your vehicle. You will need to know the make, model, and year model of the vehicle, as well as the engine type and size.
When did the first timing belt come out?
Originally made of a band with metal clips this proved to be expensive and noisy, in 1945 Singer in conjunction with Uniroyal which is now Gates Inc. developed the timing belt. Now to all you guys from the 50’s and 60’s typically every engine had a timing chain.
Why does my timing belt make a squealing noise?
Over time the timing belt can and will wear. A squealing noise from the engine or a belt that looks frayed can indicate that your belt has worn too much. Often this is just because of normal wear, other times because of wear to parts like the pulleys or a tensioner, as a faulty pulley or tensioner can rip the timing belt.
How long does it take to change a timing belt?
As a service provider it is my duty to explain this concept to you the consumer. Many times it is a 4 or 5 hour job to change a timing belt, by not doing the job right and replacing all of the tensioners, idler pulleys and the water pump at the same time puts you, the consumer in harm’s way.
Why is the timing belt on my car not working?
If your car ran fine and then the motor stopped suddenly with a clunk and won’t restart, it is likely your timing belt. The timing on the engine must be set exactly, or the valves and the pistons may collide, resulting in very expensive engine repairs.
Can a broken timing belt be removed on an interference engine?
Don’t do this on interference engines unless you’re sure the belt is still intact. If you have not already bent your valves with a broken timing belt, you will likely do so if you spin the crankshaft without the camshaft spinning. Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover.
Can you remove the tensioner on a timing belt?
Keep testing yourself! Loosen the mounting bolt (s) holding the belt tensioner using any special cam holding tools, while following the service manual. Do not remove the tensioner completely unless replacing it.