How does the ECM detect a faulty purge flow?

How does the ECM detect a faulty purge flow?

When the purge flow is determined to be faulty, a Check Engine Light is set and illuminated on the dashboard. The ECM uses a vacuum switch to detect the purge flow from the EVAP canister. What causes the P0441 code? What are the symptoms of the P0441 code? In most cases the driver will not observe any symptoms of the P0441 code.

What happens when purge valve is not opened?

In this type of system, if EVAP pressure fails to drop sufficiently when the purge control valve is opened, a code will be stored and service engine soon lamp illumination may occur. This is an emissions related code. While it may slightly reduce fuel efficiency, there is no inherent danger involved.

What do I need to diagnose p0497 low purge flow?

A suitable diagnostic scanner, a digital volt/ohmmeter, a manufacturer’s service manual (or equivalent), and a smoke machine will help to diagnose code P0497. I have a habit of beginning my diagnosis with a visual inspection of all system wiring and connectors, as well as vacuum lines and hoses.

How can I check the purge control solenoid?

Use the scanner to activate the purge control solenoid and physically check vacuum flow with the engine running and the purge control solenoid activated. If the solenoid fails to open when activated, check system voltage and ground signals as compared to manufacturer’s specs. If voltage and ground signals are present, suspect a defective solenoid.

In this type of system, if EVAP pressure fails to drop sufficiently when the purge control valve is opened, a code will be stored and service engine soon lamp illumination may occur. This is an emissions related code. While it may slightly reduce fuel efficiency, there is no inherent danger involved.

A suitable diagnostic scanner, a digital volt/ohmmeter, a manufacturer’s service manual (or equivalent), and a smoke machine will help to diagnose code P0497. I have a habit of beginning my diagnosis with a visual inspection of all system wiring and connectors, as well as vacuum lines and hoses.

What’s the trouble code on my Honda Civic?

My Si (2013) has been modified since the odometer hit about 5k miles. The vehicle now has 92k miles on it and the code popped when I was on the highway cruising at 71 mph today. Vehicle mods are RV6 catless downpipe and Invidia Q300 exhaust.

Are there free fixes for Honda Civic p0497?

If these two codes (P0497&P145c) are present, is there a free and/or nearly free fix for this. For those of you who are not familiar with what these two codes are here is the description I have via my hondata app on my phone.

Posted In Q&A