How do you turn off the maintenance light on a Toyota FJ Cruiser?
Press and hold the trip meter reset nob (next to your Toyota FJ Cruiser’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota FJ Cruiser. Hold the meter reset until the MAINT REQD light switches off.
How do I turn off my maintenance light?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do you reset the oil light on an FJ Cruiser?
Reset oil maint reqd service light Toyota FJ Cruiser
- Turn the ignition key to the ACC or LOCK position with the odometer reading shown.
- Turn the ignition key to the ON position while holding down the trip meter reset knob.
- .
- Hold down the knob for at least 5 seconds.
- The odometer indicates 000000 and the light goes off.
What kind of oil does a 2007 FJ Cruiser take?
5W-30
Engine Oil
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 5.5 quarts (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
How to reset maintenance required light on Toyota FJ Cruiser?
Turn your ignition key to the ‘ACC’ or ‘LOCK’ position. Press and hold the trip meter reset nob (next to your Toyota FJ Cruiser’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota FJ Cruiser. Hold the meter reset until the MAINT REQD light switches off.
How do you reset the odometer on a FJ Cruiser?
Press the odometer reset button until the actual odometer reading is displayed. The FJ Cruiser will display a “Trip A” and a “Trip B,” then will display the actual odometer setting. Hold the odometer reset button down with one hand while turning the ignition key one more click forward.
When to start the engine in a FJ Cruiser?
Start the engine of the FJ Cruiser to ensure the maintenance required light is no longer illuminated on the instrument panel. If it still is, perform the reset sequence again. Jody L. Campbell spent over 15 years as both a manager and an under-car specialist in the automotive repair industry.
How do I reset the maint reqd light?
Hold the meter reset until the MAINT REQD light switches off. Get in the vehicle and shut the door. Press the start button once *. Press and hold the odometer reset WHILE pressing the start button.