How do you test a Toyota throttle position sensor?
Test the TPS using a digital multimeter. Make sure that it’s still working and, if necessary, visually inspect and test the wires and connector. If the sensor tests OK, erase the code. If it comes back or you notice a performance issue.
How does the TPS work on a Nissan p0120?
The TPS sends the throttle position information back to the PCM on this signal wire. When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts.
When does a TPS sensor indicate a problem?
If the voltage spikes or is too high (over 4.65 volts with key on, engine off), then that is indicative of a problem. Carefully trace each wire from the TPS wiring harness to check for breaks, rubbing against other components, etc. Other TPS sensor and circuit related DTCs: P0120, P0121, P0122, P0123, P0124
What happens to the TPS when the throttle is closed?
The TPS sends the throttle position information back to the PCM on this signal wire. When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts. When the PCM sees a voltage that is higher than the normal upper limit, P0123 will set. other symptoms may also be present
What is the p0120 TPS signal voltage at WOT?
When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts. When the PCM sees a voltage that is outside of normal operating range, P0120 will set. NOTE: The PCM knows that any large change in throttle position means a cooresponding change in manifold pressure (MAP).
What are the signs of a failing TPS?
2. Engine won’t idle smoothly, idles too slowly, or stalls. If you start to experience engine misfires, stalling, or rough idling when the car is stopped, it can also be a warning sign of a failing TPS.
When is a bad throttle position sensor a warning sign?
Engine won’t idle smoothly, idles too slowly, or stalls If you start to experience engine misfires, stalling, or rough idling when the car is stopped, it can also be a warning sign of a failing TPS. You don’t want to wait to get this checked out!
What do you need to know about replacing TPS?
Replacing the TPS will include clearing relevant fault codes, and may require software reprogramming of the new TPS module to match other engine management software. This is all best left to a professional mechanic who can provide you with a diagnosis, and then install the correct replacement part.
What does the throttle position sensor ( TPS ) do?
The throttle position sensor (TPS) is part of your vehicle’s fuel management system and helps ensure that the correct mixture of air and fuel is delivered to your engine. The TPS provides the most direct signal to the fuel injection system of what power demands are being made by the engine. The TPS signal is continually measured…