How do you tell if your Jeep has a Dana 35 or Dana 44?
There are a few things that can help you tell if the axle is a Dana 35 or a Dana 44. The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape.
What axles are in jeeps?
Since the first edition Wrangler YJ in 1987, to the brand new JL, Jeep has featured three main varieties of solid axles produced by the Dana Holding Corporation – the Dana 30, 35 and 44. And there is a very high chance your Wrangler will have some combination of these three.
How many horsepower does a 1974 Jeep CJ-5 have?
gasoline (petrol) engine with displacement: 3801 cm3 / 231.9 cui, advertised power: 74.5 kW / 100 hp / 101 PS ( SAE net ), torque: 251 Nm / 185 lb-ft, more data: 1974 Jeep CJ-5 232 Six 4-speed (man. 4) Horsepower/Torque Curve
What kind of front axle does a jeep have?
Model 30 Front Axle: CJ-5, CJ-7, Scrambler, YJ, XJ and TJ. Front Axles Dana 30 high pinion – reverse cut used 84-99 (some axles through 91 are vacuum disconnect, 92+ are non-disconnect, 89-95 with ABS have 5-297x u-joints, all 95+ have 5-297x u-joints, all others have 5-260x u-joints)
When did the Jeep CJ 5 come out?
Jeep model CJ-5 belongs to compact off-road / SUV (sport utility vehicle) class. Represents the “J (C) (sport utility cars and off-road vehicles – segment C – medium, compact)” market segment. The car was offered with soft-top off-road body shapes between the years 1954 and 1983.
What kind of axles does a Jeepster Commando have?
Jeepster Commando: Dana 44 rear axle on all Jeepster Commandos, 67-69 had tapered axle Dana 44 and the 70-71 had the flanged Dana 44 axles. YJ Wrangler: Some early YJs also had a Dana 44 in the rear, but this option was only available in Canada.
What kind of car was the Jeep CJ 5?
The CJ-5 used the Dana 18 from ’55 until ’71. In ’72 they switched to the Dana 20. From ’80-’83 they used the Dana 300 . The CJ-5 was first offered with the Dana 25 until 1965. The Dana 27 replaced it and was used until 1971.
What kind of shaft does a Jeep CJ-5 use?
The Dana 27 replaced it and was used until 1971. From 1972-1983, the Dana 30 was used in the CJ-5. The Dana 44 with two piece shafts was used in the CJ-5 until mid-1970. A Dana 44 with one piece shafts replaced it after that until 1975. After 1976 the AMC 20 was used.
What kind of transmission does a Jeep CJ 5 have?
Transmission The T-90 3 speed was the standard transmission for the CJ-5 for many years. It’s close brother, the T-86 3 speed was used with CJ-5s with the Dauntless V6. The T-14 replaced the T-90 and later the beefy T-15 was used with CJ-5 with the 304.
How long does it take to assemble a Jeep CJ axle?
Description: Base Axle Includes: Dana 44 Low Pinion Casting 57″ WMS Wide Track CJ Width 5×5.5 Stock Bolt Pattern GM 1/2 Ton Calipers and Pads Heavy Duty 1 Ton Steering New Pitman Arm for… More Details » TYPICAL SHIP TIME IS 40-45 DAYS FROM DATE OF ORDER!!