How do you take the seat off a 2005 Heritage Softail?
Seat Removal
- Remove the passenger seat strap by removing the Torx head screw from the strap’s bracket on either side of the seat.
- Remove the Torx head bolt from the rear of the passenger seat.
- Pull the seat free from the motorcycle, and be careful not to lose the nylon washer sandwiched between the seat tab and fender.
How do you remove the seat on a Harley Heritage Softail?
Reinstall the nylon washer, lower the rear of the seat onto the frame and tighten the Torx head bolt to secure the seat to the fender. Lift the loose end of the seat strap over and across the seat. Secure it in place by tightening the Torx head bolt into the strap bracket on the side of the fender.
Do you have to remove the seat on a Harley?
You should begin every service, or repair with Harley Battery removal and Harley seat removal. The most important part would be disconnecting the battery negative cable.
How do you remove the seat from a car?
Luckily, removing the seat requires a very short learning curve and will only take a few minutes. 1. Remove the passenger seat strap by removing the Torx head screw from the strap’s bracket on either side of the seat. Lift the loose end of the strap over the seat and lay it down gently to prevent damaging the fender. 2.
How do you fix a seat on a horse?
Hold the seat at a slight angle with the rider’s saddle tipped downward. Slide the seat forward and slip the metal tab under the saddle into the catch tab on the frame. 5. Lower the rear of the seat onto the frame and tighten the Torx head bolt to secure the seat to the fender. 6. Lift the loose end of the seat strap over and across the seat.
Reinstall the nylon washer, lower the rear of the seat onto the frame and tighten the Torx head bolt to secure the seat to the fender. Lift the loose end of the seat strap over and across the seat. Secure it in place by tightening the Torx head bolt into the strap bracket on the side of the fender.
How do you remove the passenger seat strap?
1. Remove the passenger seat strap by removing the Torx head screw from the strap’s bracket on either side of the seat. Lift the loose end of the strap over the seat and lay it down gently to prevent damaging the fender. 2. Remove the Torx head bolt from the rear of the passenger seat. 3.
How do you remove the seat on a Harley Davidson?
Harley seat removal is simple, but it is important to keep track of your hardware and store the seat in a safe place; away from anything sharp, or any chemicals/oils that can harm the seat. When you open your right side saddlebag lid, you will see the Phillips screw that secures the seat strap.
Hold the seat at a slight angle with the rider’s saddle tipped downward. Slide the seat forward and slip the metal tab under the saddle into the catch tab on the frame. 5. Lower the rear of the seat onto the frame and tighten the Torx head bolt to secure the seat to the fender. 6. Lift the loose end of the seat strap over and across the seat.