How do you reset the tire pressure sensor on a 2008 GMC Yukon?
Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake. Turn the ignition to the ON position without starting the engine. Increase/ decrease tire pressure for 10 seconds, starting from the driver’s side front tire (LF) until horn sounds.
How does the TPMS work on a GMC Yukon?
When the TPMS detects a significantly under-inflated tire pressure, a “CHECK TIRE PRESSURE” message is displayed on the DIC and the low tire pressure indicator is displayed on the IPC. This DIC message will also set if a spare tire is in use.
When to retrain tire pressure sensor in GMC Yukon?
If warning indicators are still on after a completed relearn procedure, there is a problem in the TPMS. NOTE: When the wheels have been rotated, or a tire pressure sensor or RCDLR has been replaced, retrain the tire pressure sensor.
Where is the TPMS activation button on a GMC Sierra?
To use, place the activator antenna against the tire sidewall close to the wheel rim at the valve stem location, then press and release the ACTIVATE button. NOTE: If a TPMS Sensor Activation Tool (EL-46079 or EL-50448) is used, and the vehicle is having trouble entering the relearn mode, check the batteries in the activation tool.
When the TPMS detects a significantly under-inflated tire pressure, a “CHECK TIRE PRESSURE” message is displayed on the DIC and the low tire pressure indicator is displayed on the IPC. This DIC message will also set if a spare tire is in use.
If warning indicators are still on after a completed relearn procedure, there is a problem in the TPMS. NOTE: When the wheels have been rotated, or a tire pressure sensor or RCDLR has been replaced, retrain the tire pressure sensor.
When to do a TPMS reset on a GMC Terrain?
When tires are rotated, GMC recommends resetting the TPMS system by performing a TPMS relearn to transfer the new location of the TPMS sensors to the vehicle’s ECU. It is also recommended to do a TPMS reset after a wheel or sensor replacement.
When to change placard pressure on GMC Yukon?
Use the VT56 or VT46 branded tools to change placard pressure for the GMC Yukon if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires. VT56 placard value adjustment now available for March 2019 update!