How do you reset the maintenance required light on a Toyota Tacoma?
Step by Step Work Guide for How to Turn off Maintenance Light on Toyota Tacoma
- Turning on the Toyota Tacoma.
- Turn off the car and press the reset button of the trio meter.
- Turn off your car’s engine and press the reset button of the trio meter.
- Pressing the reset button.
- Release the reset button.
What does the maintenance required light mean on a 2009 Toyota Tacoma?
Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. The maintenance-required light is easy to reset. On most Toyotas you simply: Turn the key to the on position.
What does flashing maintenance required light mean?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
How do I reset the maintance light?
Here’s how you do a maintenance light reset: Put your key in the ignition. Turn the key to position one. This is the position just before starting the car. Push the trip meter reset button on the dashboard. Hold it down for a second or two. Continue to hold the odometer button for around ten seconds. The light should flash, beep, and then go out. Once off, release the odometer button. Start your car.
What does the maintenance required light mean?
The maintenance required light just means that some sort of scheduled maintenance needs to be done. Most of the time it just means you need an oil/filter change. Your owner’s manual will list what maintenance is required based on your milage.