How do you reset the low tire pressure light on a Jeep Wrangler?
Resetting Your Tire Pressure Light
- Drive your vehicle for 10+ minutes at 50+mph.
- Turn your car off if it’s running.
- Start the vehicle and turn it off.
- Inflate all your vehicle’s tires to 3 PSI more than the recommended pressure.
- Once your tires are deflated, reinflate them to the recommended tire pressure.
Where is the TPMS reset button on Jeep Wrangler?
Shortly after, the “system error tpms” message should change to say “system ok”. To reset the tire pressure monitor or tpms system in your 2017 jeep wrangler vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.
What should the tire pressure be on a Jeep Wrangler?
Recommended tire inflation for Jeep Wrangler Sport is 29 psi to 38 psi for front tires and 29 psi to 38 psi for rear tires.
Why is the TPMS warning light still on on my Jeep Wrangler?
Even if you already have properly-inflated tires, your TPMS warning light can still turn on. Hopefully, it’s simply a matter of cold weather tricking the sensor. When filling up warm tires, the pressure should be increased by 4 PSI (at most) beyond the tire’s recommended pressure in order to turn the TPMS light off.
How to reset the tire pressure light on a Jeep Wrangler?
In this video I explain how to reset the tire pressure indicator light (TPMS) on a Jeep Wrangler. Step 1. Inflate all 5 tires (including the spare) to the recommended factory psi levels that are posted on the “Tire and Loading Information” sticker inside the driver’s side door opening. In this case it is 35 psi for all 5 tires. Step 2.
What does the TPMs do on a Jeep Cherokee?
Jeep Cherokee’s are equipped with a TPMS (Tire Pressure Monitoring System) to assist you in maintaining the correct tire pressure. The warning low-pressure indicator light which appears within your dashboard or via the EVIC, indicated by a chime, should turn off automatically after your tires receive the proper amount of air pressure/ PSI.
What does it mean when your TPMS warning light is on?
So check your tires carefully. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.
Even if you already have properly-inflated tires, your TPMS warning light can still turn on. Hopefully, it’s simply a matter of cold weather tricking the sensor. When filling up warm tires, the pressure should be increased by 4 PSI (at most) beyond the tire’s recommended pressure in order to turn the TPMS light off.
What does tire pressure monitor on Jeep Wrangler do?
The Wrangler Tire Pressure Monitor System is designed to alert the driver when tire pressures are below the recommended tire pressure as stated on the vehicles cold placard pressure. If this is not happening you need to inspect the sensors or have the TPMS module reprogrammed to relearn the sensor information.
In this video I explain how to reset the tire pressure indicator light (TPMS) on a Jeep Wrangler. Step 1. Inflate all 5 tires (including the spare) to the recommended factory psi levels that are posted on the “Tire and Loading Information” sticker inside the driver’s side door opening. In this case it is 35 psi for all 5 tires. Step 2.
What is the spare tire sensor number on a Jeep Wrangler?
Your spare tire sensor is inactive, until it is replaced by on one of the wheels. The replacement part number is: OEM:433 – Schrader 20398. If the tire pressure drops below the low tire pressure warning limit, the driver will be alerted.