How do you reset the immobiliser on a Peugeot 308?

How do you reset the immobiliser on a Peugeot 308?

2 Answers

1. Insert key into ignition and turn to RUN, not start.
2. Wait 10 seconds.
3. Press the lock button for 10 seconds.
4. Turn the key to OFF.
5. Remove the key and wait for 10 seconds.
6. Press the lock button, the dash lights should come on.

How to programming a Peugeot 206 immobilizer key?

Open the door and hold the Plip key near the Ignition switch and press the large plip button once. 7. Turn the ignition ON, wait 10 seconds and then turn the ignition OFF. 8. After 5 seconds the Plip should now operate ​ But what LED where? There’s no LED on the key on the dashboard anywhere – I don’t know what they mean.

Is there an engine immobiliser fault on my Peugeot 206?

HelloA friend of mine is getting an “Engine immobiliser fault” message on the dashboard of her Peugeot 206 (05 plate). This is happening several times on first starting the car but also when driving. The Peugeot dealer and the seller (garage) cannot find a fault when they used a diagnostic tool.

How did you find the Peugeot central immobiliser?

How did you find Peugeot Central?: Google Ok so finally got a trailer and took the car to a guy who deals with diagnostics. Seems the BSI unit has got all confused and lost the key coding for the immobiliser. Interestingly it will not accept the keys again as there is an error where it has lost communications with the ECU.

How do you unlock the door on a Peugeot?

1. Ensure all doors are unlocked using the key. 2. Press and HOLD the large plip key button while the LED flashes continuously for 20 seconds. After 20 seconds press the small deadlock button once while still holding the large button. 3. The LED will stop flashing. 4. Release the large button and the LED will light constantly.

HelloA friend of mine is getting an “Engine immobiliser fault” message on the dashboard of her Peugeot 206 (05 plate). This is happening several times on first starting the car but also when driving. The Peugeot dealer and the seller (garage) cannot find a fault when they used a diagnostic tool.

When did the supermini Peugeot 206 come out?

The supermini Peugeot 206 was produced from 1998 to 2008. In this article, you will find fuse box diagrams of Peugeot 206 (2002, 2003, 2004, 2005, 2006, 2007 and 2008), get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).

Where are the fuses located on a Peugeot 206?

In this article, you will find fuse box diagrams of Peugeot 206 (2002, 2003, 2004, 2005, 2006, 2007 and 2008), get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout). Cigar lighter (power outlet) fuse in the Peugeot 206 is the fuse #22 in the Instrument panel fuse box.

Where is the transponder located on a 206?

There is a transponder on the 206 you have – it is attached to the ign barrel under the plastic surround… This is a common fault and would be the usual thing to replace in such circumstances – especially when the problem is intermittent ..and have the system re set / reprogrammed..