How do you reset the check engine light on a S2000?
Something like this: Put the key in, hold the trip button down for like 15 seconds while the key is the ACC or on position(one of the two) Then start the car while still holding the trip button and wait for the light to turn off.
How many miles do S2000 last?
The S2000 is a very well built car. The car will easily last 300,000 miles if you maintain it and don’t abuse it.
How do I turn off the maintenance light on my S2000?
Reset oil service light Honda S2000
- Turn the ignition off.
- Press and hold the TRIP METRE RESET button while you turn the ignition switch to run, one position before starting engine.
- Continue holding the button until the indicator resets, indicator light goes out.
What was the displacement of the Honda S2000?
The engine’s stroke was lengthened, increasing its displacement to 2,157 cc (2.2 L; 131.6 cu in). At the same time, the redline and fuel cutoff were reduced from 8,800 rpm and 9,000 rpm to 8,000 rpm and 8,200 rpm respectively, mandated by the longer travel of the pistons.
How to get the Check Engine light on a Honda?
Honda Check Engine Light Codes 1 Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2 Turn the ignition on. 3 MIL will indicate DTC’s by outputting a number of flashes.
When did the Honda S2000 club racer come out?
The S2000 Club Racer made its world debut at the New York International Auto Show on 4 April 2007.
What’s the steering ratio on a Honda S2000?
The lock-to-lock steering ratio was reduced to 1.4 turns (stock is 2.4). Honda outfitted Type V cars with revised damper units, stabilizers and limited slip differentials to “complement the VGS”. Equipped cars came with a special steering wheel and a VGS badge on the rear. The 2004 model S2000 underwent several significant changes.