How do you reset the airbag light on a Nissan Almera?
Put your key in the ignition and turn it until the dashboard lights come on. Do not start the engine. Press the button on the inside of the door (pictured below) 5 times before the airbag warning light comes on (you have about 5 seconds so don’t panic). Turn the key all the way off as soon as the airbag light goes off.
How to reset Nissan Almera airbag warning light?
Put your key in the ignition and turn it until the dashboard lights come on. Do not start the engine. Press the button on the inside of the door (pictured below) 5 times before the airbag warning light comes on (you have about 5 seconds so don’t panic). Turn the key all the way off as soon as the airbag light goes off.
Why does my airbag warning light keep flashing?
The light keeps flashing! If your warning light hasn’t started to irritate you yet, it will. Your airbag warning light staying on is not only annoying, but it can be distracting too. You now have to take your Nissan Almera to the garage and spend a day’s wages on getting it put right, or do you?
Is there Mil fault code for Almera airbag?
No MIL fault code that I can read with my OBD thinga. if you read the FSM, its not too clear on an actual “reset” procedure, but I inferred that you put it into diag mode, see what the flashes are, fix it (which you have already done), then put it in user mode.
How does SRS work on an Almera airbag?
SRS will not enter Diagnosis mode if no malfunction is detected. After a malfunction is repaired, switch the ignition “OFF” for at least one second, then back “ON”. Diagnosis mode is returned to User mode. 1) Turn ignition switch “ON”. 2) After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch “OFF” within 1 second.
Put your key in the ignition and turn it until the dashboard lights come on. Do not start the engine. Press the button on the inside of the door (pictured below) 5 times before the airbag warning light comes on (you have about 5 seconds so don’t panic). Turn the key all the way off as soon as the airbag light goes off.
SRS will not enter Diagnosis mode if no malfunction is detected. After a malfunction is repaired, switch the ignition “OFF” for at least one second, then back “ON”. Diagnosis mode is returned to User mode. 1) Turn ignition switch “ON”. 2) After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch “OFF” within 1 second.
How to turn off air bag warning lights?
mode is returned to User mode. 1) Turn ignition switch “ON”. 2) After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch “OFF” within 1 second. 3) Wait more than 3 seconds. 4) Repeat steps 1 to 3 three times. 5) Turn ignition switch “ON”. Cheers, didn’t think there was a way without Consult, so cheers .
No MIL fault code that I can read with my OBD thinga. if you read the FSM, its not too clear on an actual “reset” procedure, but I inferred that you put it into diag mode, see what the flashes are, fix it (which you have already done), then put it in user mode.